One Nite 16 - Suspended Plan (oz5623)
Suspended Plan
This plan has been suspended from Outerzone. No longer available to download.
About this Plan
SUSPENDED ----- at the request of Peck Polymers (new owners, Dec 2015) ------ One Nite 16 - Rubber sport model.
Quote: "Stable high performance rubber powered model". Discontinued kit. An original, cleaned up, 1976 plan scan from Peck Polymers.
Direct submission to Outerzone.
Supplementary file notes
Instructions for building, including co2 set up. Printwood scan. Scan direct from kit. Both are thanks to Quazi.
User comments
Added photo of his completed One Nite 16 model, thanks to Maciej. See more pics on his build thread at http://awiatikforum.ok1.pl/viewtopic.php?t=500SteveWMD - 12/06/2014
Steve, See my just-completed One Nite 16 [more pics 004], built from the plans on your site. Maybe The Flash could build it in one night but it took me over a week. Today began the first test flights, with no adjustments at all it was doing 30 seconds. I expect it to do better with more rubber and some rubber lube. I lengthened the fuselage 2 inches to compensate for weight of the plastic prop, which I replaced with a lighter carved balsa version instead. I think it's a little too much prop for 1/8" rubber, will try another prop soon for a better climb. I seem to remember using a 5" prop with the same rubber back in the day. Mine is covered with Esaki tissue and one coat of dope. I thought I had a bottle of Brodak dope but it was all dried up, so I substituted some Minwax Brushing Lacquer, thinned with MEK, which worked very well, similar to hard to find low shrink nitrate dope. Believe the plans when they say not to shrink the tail surfaces. I made a balsa frame and covered it with tissue, then shrunk and doped one thin coat. Cut out of the frame, the pre-shrunk tissue worked fine and didn't warp the delicate surfaces. I shrunk and doped the wing and it survived without warps, the fuselage got two coats. I was surprised at the performance, hope to get a lot more soon....
DougSmith - 11/11/2015
- One Nite 16 (oz5623) - Suspended plan.
- Plan File Disabled
- Supplement Disabled
- Supplement Disabled
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.