OV-10A Bronco (oz8399)

 

OV-10A Bronco (oz8399) by Frank Capan from Model Airplane News 1968 - plan thumbnail

About this Plan

North American OV-10A Bronco. AKA COIN Fighter. Radio control scale twin. For 2 x Enya .60 engines.

Quote: "I have been and probably always be a scale bug. and I'm sure that all of us watch with interest when we see scale models at the field, because the name of the game is to make like the real ones. There is nothing like the realism in watching a scale model perform well in the air. Look around at all the cameras when someone brings a scale job out. With the '67 Nats coming up in the Los Angeles area I started looking for a different sort of twin engine plane I could model. I started at the Douglas A-20, the North American B-25 and a few others and then decided since the North American plant was in this area I should concentrate on something of theirs. This is how the COIN Fighter came about. It looked interesting enough and perhaps I might be able to over-whelm some of the judges and be able to place in the money, so to speak.

I make no attempt to construct any of my scale RC models exactly like the real one. All I want is to have my model look like the real one The important thing is to have the model fly, and fly as well as possible. I don't have much use for a scale model that flops all over the sky or is maybe not even able to ROG because of so much weight and lack of power. There is no reason for this. It should be built strong enough and with enough power to do the job. I think the '67 Nats proved that just about any scale model would fly. Even with reeds, yet.

When you first look at the layout of the Bronco, you wonder if it actually is something you could fly without any wild aerodynamic problems. Noting the three-views and the scale control surfaces, especially the ailerons, you begin to wonder. But I decided to go scale all the way and unless I figured the scale wrong, it is exactly as the factory plans, which I obtained straight from the Columbus division of North American Aviation.

I decided on a scale of 1-3/4 inches to the foot and it comes out about 70 inch span. Originally, I started to build 2 inch to the foot, but I couldn't afford all the balsa. It also happened to be the short wing version which they changed to a longer wing, bringing the span on the original to forty feet instead of thirty feet. It would have really been a monster at 2 inches to the foot and this is why I went to 1-3/4 inch scale. Maybe I should have stayed at 2 inch, though. It would have been much easier to figure out even numbers. Never again!

I started construction in January '67 and finished on the Saturday before the Nats. Luckily I didn't need traveling time or I really would have been in trouble. I used the combination tank mounts for the Enya 60's, figuring on a neat installation, until one broke at the plastic cap end. What a feeling to be fueling up on the day of qualifying and watch fuel run out of the wheel well and down the strut! All that work and I'm washed up before I start!

Fortunately, with the aid of some friends, we scrounged up an 8 oz. fuel tank, some hose and some wire to build the throttle push rods that I had so conveniently left at home, carefully marked right and left. You see, I actually didn't want to fly the beast because I'm really a coward. But these so-called friends of mine gave me so much help that I was forced to make the field repairs and then - the moment of truth. The darn radio worked (it always does), both engines started and ran like dreams and there really was no way out because, as they say, all systems were go - except me, of course. I taxied out and lined up on the runway, advanced the throttles, and took off.

Now there are some who say this was the first flight and in a sense this is true. You see, it was the first flight with all the cockpit detail and entire ship painted, but it wasn't actually the maiden flight. I really don't think the Nats is the place to test a scale job. Besides, I wasn't too sure those little ailerons would really work. So, being not only a coward, but also a little lazy, I couldn't see any sense in completely finishing this thing not even knowing if it would fly. I decided to clear dope, silk, and seal the ship, install the equipment, cardboard up the entire cockpit, and go out and see if the beast would actually fly. Would you believe the only thing I had to do was to trim in a little down elevator? This ship is one of the easiest flying models I have ever had. The flaps work beautifully. You can really four point it too..."

Direct submission to Outerzone.

Supplementary file notes

Article pages.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

OV-10A Bronco (oz8399) by Frank Capan from Model Airplane News 1968 - model pic

Datafile:
  • (oz8399)
    OV-10A Bronco
    by Frank Capan
    from Model Airplane News
    September 1968 
    70in span
    Scale IC R/C Multi Military Bomber
    all formers complete :)
    got article :)
  • Submitted: 20/01/2017
    Filesize: 1186KB
    Format: • PDFbitmap
    Credit*: Bernd57

ScaleType:
  • North_American_Rockwell_OV-10_Bronco | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz8399) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/North_American_Rockwell_OV-10_Bronco
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

OV-10A Bronco (oz8399) by Frank Capan from Model Airplane News 1968 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

For a long time I wanted to build this model and I did not have the plans, fortunately I found it on this page, thanks
Julian paez - 26/09/2020
I really want to build this... do you think two OSmx 40LAs would do the job?
Tom - 15/09/2021
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.