Air Trails Sportster (oz78)
About this Plan
Air Trails Sportster. FF model, gas power. Series Fifty Air Trails Sportster.
The original Ben Shereshaw Air Trails Sportster (oz9197) was published in 1939. This here is a later plan, showing RC installation.
"Series 50 Old Timer" kit from Cal Aero-Models. It seems this same kit was also later sold by Midway Models.
Note: This is not a full scale plan [fixed now, see update below].
Update 2/11/2026: Replaced this plan with a clearer copy, now at full size, thanks to DanA.
Update 2/11/2026: Added parts and instructions, also electric installation sheet, thanks to DanA.
Supplementary file notes
Electric installation sheet.
Instructions.
Parts.
Previous scan version.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz78)
Air Trails Sportster
by Ben Shereshaw
from Cal Aero-Model, Midway Models
1976
50in span
IC F/F R/C Cabin Kit
clean :)
all formers complete :)
-
Found online 02/04/2011 at:
http://www.rcgroups.com/forums/showthread.php?t=1265873
Filesize: 547KB
Format: • PDFbitmap
Credit*: orange&white, DanA
Downloads: 5381
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Just completed construction of this aircraft. When I get brave enough I will go out to the flight line. Used a Cal Aero Model kit that I have had for a number of years. I decided to go electric. A few photos are attached [more pics 005-008].Jerry - 09/04/2018
Greetings, Does anyone have a complete set of fuselage former templates for the Sportster (OZ78)? Cheers,
David
David L Hammond - 14/07/2023
First of all my compliments for considering a plan from the earliest archaeological layers of the Outerzone :)
I don't think you need former templates. Looking at the plan and side views, all sections are rectangular so it will be an easy task of measuring lengths and widths from the plan itself. That's what I would do.
The exception is the firewall, which is clearly defined in the plan, and the upper former inside the cabin which is a development of the upper part of the firewall. All the other fuselage 'curved bits' are simple soft balsa fillings, sanded into shape.
If you need any further help, "ask and ye shall receive" :)
Miguel - 14/07/2023
This kit plan seems to be a pretty faithful copy of the original design. So I'd suggest refer to the original 1939 drawings at Air Trails Sportster (oz9197) which include all ribs and formers.
SteveWMD - 14/07/2023
Miguel, The dorsal nose section from the cabin forward is curved and larger than the firewall and the ventral surface of the fuselage from the firewall aft of the cabin is also curved (per the plans of the original design).
Thanks for the suggestion Steve - will use both plans to make my kit.
David L Hammond - 14/07/2023
Bushwacked by the original version! Perhaps the missing parts were woodprint and this was not recorded?
Miguel - 14/07/2023
David: I think SteveWMD is correct. To wit, you can use the formers from the original plan. That said, yesterday, I snagged an Air Trails Sportster kit sold by Midway Models. On the box and on the plan, the Midway Models sticker peeled off easily and revealed that this kit was produced by Cal-Aero. I checked here to see if the plan was available. I could scan the parts along with the construction booklet and flyer. The only problem is, I think my emails with attachments are going into OZ-spam. What I post here goes up unedited. If I ever get back to the UK, I'd like to pay my respects to OZ and hand them some cash for all the wonderful work that they do. But, they might be so inundated with work, they won't even have time for tea!
DAN - 16/10/2026
You can donate online.
Stephen - 17/10/2026
Add a comment
- Air Trails Sportster (oz78)
- Plan File Filesize: 547KB Filename: Sportster_oz78.pdf
- Supplement Filesize: 1629KB Filename: Sportster_oz78_electric_installation.pdf
- Supplement Filesize: 643KB Filename: Sportster_oz78_instructions.pdf
- Supplement Filesize: 413KB Filename: Sportster_oz78_parts.pdf
- Supplement Filesize: 1481KB Filename: Sportster_oz78_previous.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2026.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.