Two Tee (oz7773)

 

Two Tee (oz7773) by Gene Wallock 1980 - plan thumbnail

About this Plan

HOB Two-Tee. Radio control glider. 2 metre wingspan, 2-channel RC, T-tailed sailplane. All balsa and ply construction.

Supplementary file notes

Instructions.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Two Tee (oz7773) by Gene Wallock 1980 - model pic

Datafile:

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

The first RC model I built was a Two Tee. Fairly simple to build. Flew ok, not very fast. The t-tail arrangement meant that the fuselage would break at the front of the fin. Also, the horizontal stab could come off with a "crack the whip" effect. This is a floater, so it's fine to use your old standard sized servos, receiver, and 4 cell AA battery. I've never managed to strip gears on "standard" servos, so that's a plus without throwing money at the problem. There are probably better models unless you have nostalgia for this one in particular. But it's not bad. I suggest making the horizontal stab as light as possible and possibly fastening it in place with one small nylon screw that could break in crashes. The ability to pivot might reduce the damage from moving it around and hitting the stab on things like the edge of a car door. Consider tapering the rudder and elevator to save weight, using very light wood. Built up might be a little lighter for the elevator. The fin is a bit heavy, since it's sheeted on both sides. If there was a lighter way to make it strong, that might reduce the load on the fuselage. A real airfoil, which would be thicker, might help, but it would increase the complexity. Reinforcing the fuselage near the front of the fin is probably a good idea.
LincolnRoss - 08/06/2016
Add a comment

 

 
 

Download File(s):
  • Two Tee (oz7773)
  • Plan File Filesize: 1883KB Filename: Two-Tee_2m_sailplane_oz7773.pdf
  • Supplement Filesize: 2036KB Filename: Two-Tee_2m_sailplane_oz7773_instructions.pdf
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2026.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.