Shoestring Stunter (oz6873)
About this Plan
Shoestring Stunter. Profile stunt model for control line.
Quote: "Steve I have resized and cleaned up a set of plans of the Carl Goldberg Shoestring Stunter for C/L Fox .35. I have included Root and Tip rib for building a wing using the stack method on the plan. Separately I am sending, wing tip, rudder and stabilizer outlines. I also included some very nice pictures of Gene's Shoestring from RCUniverse."
Direct submission to Outerzone.
Update 05/08/2015: Replaced this plan with one featuring a minor revision, wing root rib detail.
Update 28/5/2025: Added complete instructions sheet, thanks to MikeInSC.
Quote: "Thought you could add this sheet to the folder for the Carl Goldberg Profile Shoestring Stunter, 42 in wingspan (oz6873). This is a cleaned up copy from an original Instruction sheet... you have the plan, but not the instructions... it should help people building this plane!!"
Supplementary file notes
Formers and decals, zipfile.
Instructions.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz6873)
Shoestring Stunter
from Carl Goldberg (ref:G-9)
1962
42in span
IC C/L Kit
clean :)
all formers complete :)
-
Submitted: 17/07/2015
Filesize: 6614KB
Format: • PDFbitmap
Credit*: GeorgeAlbo, MikeInSC
Downloads: 4681










Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Shoestring Stunter built from your plans [pic 006].David Wartel - 09/07/2020
Hi Mary, I already had a model I built from the Carl Goldberg kit and decided to build another Shoestring stunter. I downloaded your standard plan and had it increased to 48” span. I also wanted to add flaps and therefore needed to thin down the back of the wing section shown on your plan. I used an OS 32 SX which supplies ample power. I made the nacelles using fibreglass and the longer one supplies air to the base of the engine. I also decided to make a built up fuselage rather than the profile style but kept the same side view dimensions. A few photos here showing both the original profile model and my new enlarged modified one with a built up fuselage [main pic, 007-012] .
John Lewis - 31/03/2024
Add a comment
- Shoestring Stunter (oz6873)
- Plan File Filesize: 6614KB Filename: Shoestring_oz6873.pdf
- Supplement Filesize: 2426KB Filename: Shoestring_oz6873_formers_decals.zip
- Supplement Filesize: 1106KB Filename: Shoestring_oz6873_instructions.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2025.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.