Go-Go Dancer (oz6858)

 

Go-Go Dancer (oz6858) by Steven Pauley 2005 - plan thumbnail

About this Plan

Go-Go Dancer. Radio control sport park flyer model. Wingspan 26 in, wing area 163 sq in, for electric power with GoBrushless V1 16T outrunner motor.

Note this plan, along with PDF kit manual, is [was] a free download from the [now defunct] manufacturer's site at: http://www.electroflying.com/gogodancer.html

Quote: "Go-Go Dancer is a 30-watt electric-powered sport park flyer. Powered by a small CD-ROM brushless motor and a 2-cell 640 mAh LiPoly battery, Go-Go Dancer will give you spirited performance at a very affordable price.

The Go-Go Dancer Design: Go-Go Dancer is an original kit designed for modelers with an interest in electric-powered airplanes capable of park flying and sport aerobatics. Go-Go Dancer was designed from the beginning for lightweight brushless CD-ROM motors and LiPoly cells. This airplane makes use of strong, lightweight design and construction, which improves electric-powered flight performance and duration. Using the suggested motor and cells, the model weighs about 7 oz ready-to-fly.

Go-Go Dancer was designed to fly a wide speed range and handle windier conditions than most park flyers. Aerobatics, from very tight maneuvers to large, powerful loops, slow rolls, snaps, and big stall turns are all possible. Go-Go Dancer is very stable, and if trimmed out right, will almost land itself. The model is controllable and flies smoothly even in high winds, yet slows down and lands like a feather. Go-Go Dancer is a great-flying electric-powered model that flies predictably - not your typical 'flip-and-flop' park flyer. Go-Go Dancer should not be flown by a beginner R/C pilot.

Go-Go Dancer was designed to make motor battery changes as easy as possible, with no tools required. You don’t have to turn the airplane over or remove the wing to change batteries. Just lift the front battery hatch up and flip it forward for easy battery access. The hatch is hooked in the front and small magnets hold the hatch rear in place.

The recommended motor for Go-Go Dancer is the GoBrushless basic CD-ROM motor kit with 16 turns powered by 2S1P - 640mAh LiPoly cells at 5 amps. A 6x4 prop is recommended. This combination gives spectacular performance and long flight times.

Go-Go Dancer is light, yet tough. Go-Go Dancer is a simple-to-build, fly-anywhere airplane that is one of the best ways to get into brushless performance on a budget.

This kit features leading edge design and interlocking laser-cut parts for exceptional fit, quality, and ease of construction. A complete set of hardware is also included.

The Go-Go Dancer plans were drawn on a computer using professional design software. We believe that the Go-Go Dancer plans are a work of art and continue our high standards in kit manufacturing at ElectroFlying Models.

Easy-building engineering, great price, brushless performance and great flying qualities, the Go-Go Dancer has it all.

Recommended Receiver, Motor and Batteries: The ElectroFlying Go-Go Dancer can use any standard 4-channel narrow-band receiver, but to save a little weight you may want to use one of the smaller receivers such as the Castle Creations Berg 4L. Go-Go Dancer has been designto use 3 Hitec HS-45HB servos and a BEC..."

Supplementary file notes

Instructions, 26 pages complete.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Go-Go Dancer (oz6858) by Steven Pauley 2005 - model pic

Datafile:

Go-Go Dancer (oz6858) by Steven Pauley 2005 - pic 003.jpg
003.jpg
Go-Go Dancer (oz6858) by Steven Pauley 2005 - pic 004.jpg
004.jpg
Go-Go Dancer (oz6858) by Steven Pauley 2005 - pic 005.jpg
005.jpg
Go-Go Dancer (oz6858) by Steven Pauley 2005 - pic 006.jpg
006.jpg
Go-Go Dancer (oz6858) by Steven Pauley 2005 - pic 007.jpg
007.jpg
Go-Go Dancer (oz6858) by Steven Pauley 2005 - pic 008.jpg
008.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

The site is evidently gone, so the plan file is unavailable.
Jean Tornow - 06/12/2023
New user? Hi and welcome. Short answer: scroll down this page and look for the 'Download Files' section. Longer answer: see the site FAQ page at https://outerzone.co.uk/faq.asp#downloadplans for full details on how this site works, also detailed help with file downloads.
SteveWMD - 06/12/2023
The Datafile link to 'found online' is often useful after sites have gone down. With this one, I have just added more pics here [003-008] from the defunct site using the Wayback machine and that useful link.
SteveWMD - 06/12/2023
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.