Yellow Electrician (oz5916)
About this Plan
The Yellow Electrician. Electric powered sport tailless model for RC.
Quote: "Looking for something different and exciting? Well, here it is - a flying wing that's quick to build, looks different, and flies great! By Joe Beshar.
One way to reduce the weight of an electric model is to eliminate parts of the aircraft - the basis of the Yellow Electrician is basically that approach. Fundamentally, it employs a flying wing without stabilizer/elevator section, a rudder, and a fuselage, which is roughly half the length of a conventional assembly. Elevons are used for control which necessitates the need for a mixer radio system. The prototype employed the Airtronics Module radio with micro servos and receiver. The motor control used is the Aristo-Craft SP180I which contains a B.E.C. (Battery Eliminator Circuit). The plug-in type automotive fuse on the fuselage side serves as an onloff motor switch where it's removed.
The design of the Yellow Electrician addresses the mass, which is any inherent part of electric powered models. Batteries need to be carried and the stresses are imposed in the aircraft as a result of the payload weight. That is why the bottom section of the Yellow Electrician (which carries the batteries) is constructed as a module completely separate from the main fuselage and shock absorbent by virtue of the elastic bands which hold it in place. The same principle is employed for the landing gear, which is also held with the same elastic bands that hold the battery module, wing, and fuselage together.
This results in a system assembly which is very resistive to hard landings and impact. The mid wing design makes the Yellow Electrician very easy to hand launch if so desired. By grasping the module at both sides it can be thrust forward readily and steadily. You will find the Yellow Electrician to be an extremely maneuverable electric model. It has the capability to do just about any maneuver. It performs extremely well with either an Astro Flite 030 Cobalt motor with 6 cells, or 050 Cobalt motor with 7 cells.
The Yellow Electrician is a lion, with an 050 Cobalt and 7 cells. A steady thumb is a must, as it is a demon which will really keep you on your toes and challenge your coordination. It is not unstable, but fast and maneuverable. To tame the lion, simply use an 035 Cobalt motor with 6 cells and it still remains a great performer..."
Quote: "Steve, This one needs a disclaimer. It was designed for a heavy cobalt. It will never balance with a brushless motor. Ask me how I know..."
Direct submission to Outerzone.
Supplementary file notes
Article pages, text and pics, thanks to theshadow.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz5916)
Yellow Electrician
by Joe Beshar
from RCMplans (ref:1082)
January 1991
45in span
Electric R/C LowWing
clean :)
all formers complete :)
got article :) -
Submitted: 11/09/2014
Filesize: 1218KB
Format: • PDFbitmap
Credit*: AusterPilot
Downloads: 2717
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Should be listed as a Plank. It would be easier for some to find. Joe was a great Armenian-American who flew a B-17, was a SAM president, loved all segments of modeling.Ian - 04/04/2022
Joe Beshar didn't call this design a plank, he called it a flying wing. He didn't use the word plank anywhere in the article text, as far as I can see. Basically, plans here are listed with the title they had when published.
SteveWMD - 04/04/2022
Touché
D A - 05/04/2022
Add a comment
- Yellow Electrician (oz5916)
- Plan File Filesize: 1218KB Filename: Yellow_Electrician_oz5916.pdf
- Supplement Filesize: 976KB Filename: Yellow_Electrician_oz5916_article.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.