Scheldemeeuw (oz5199)

 

Scheldemeeuw (oz5199) by John Walker 1981 - plan thumbnail

About this Plan

Scheldemeeuw (Sheldt Gull). Scale Co2 powered model of the 1930s Dutch single-seat biplane pusher flying boat.

Quote: "A seldom seen pusher-flying boat design for use with CO2 power. Sheldt Gull, by John R Walker.

The Scheldemeeuw (Scheldt Gull) was a light single place pusher flying boat, built by Koninklijke Maatschappij of Vlissengen in the Netherlands. The plane had a single-step flat-sided hull and was constructed of spruce and plywood. The hull was plywood covered.

Built in the mid-1930's (an all metal version of the Gull was constructed but WWII caused the developmental program to come to a halt) the Gull had a span of 22 feet (6.7 m), a length of 17.3 feet (5.3 m) and a height of 8.16 feet (2.3 m). Maximum speed was 78 mph (125 kmh) and a cruising speed of 65 mph (105 kmh). Range was 1900 miles (300 km). A 40 hp Parga two cylinder opposed aircooled engine supplied the power.

No three-views could be found. Our model was developed from photographs and infor-mation supplied in Jane's All The World's Aircraft 1939.

Since the original Gull had a twin cylinder opposed aircooled engine, the Brown COs Twin seemed to be an ideal selection for our model. We were quite pleased with the flight characteristics. Only three test flights were necessary to trim out our model. The model flew at a slow, steady speed and climbed until the CO2 charge started to run out. The dry, hot weather precluded ROW flight testing.

Construction. The model is not difficult to build. It must, however, be built light. Use care in selecting the balsa. Use the lightest wood you can find. If 1/20 in sheet is not available, sand 1/16 sheet to that thickness. We made ours by placing 1/16 sheet between two lengths of .040 music wire that we had 'hot Stuffed' to a smooth, flat board. We sanded until our sanding block contacted the wires.

Additional weight can be removed by cut-ting lightening holes in the ribs and formers.

The first step is to construct the fuselage. Cut out all formers, the backbone and keel... "

Update 27/05/2016: article pages, text & pics added, thanks to RFJ.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Scheldemeeuw (oz5199) by John Walker 1981 - model pic

Datafile:

ScaleType:
  • De_Schelde_Scheldemusch | help
    see Wikipedia | search Outerzone
    ------------
    Test link:
    search RCLibrary 3views (opens in new window)


    ScaleType: This (oz5199) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/De_Schelde_Scheldemusch
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Scheldemeeuw (oz5199) by John Walker 1981 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.