36in Floats (oz4640)


36in Floats (oz4640) by Don McGovern - plan thumbnail

About this Plan

36in Floats. 36in float length, ideal for 48in fuselage.

Quote: "Float installation shown is well tested, practical, rugged and easily dis-assembled at any time. Floats are adjustable for take-off trim... Floats should be 70% to 75% of fuselage length. Shorter floats are usually not adequate... When you think you have enough dope on your floats - add another five coats."

Direct submission to Outerzone.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

No model pic found for this plan

  • (oz4640)
    36in Floats
    by Don McGovern
    from Flying Models
    48in span
    clean :)
    all formers complete :)
  • Submitted: 24/07/2013
    Filesize: 606KB
    Format: • PDFbitmap
    Credit*: JJ
    Downloads: 2852

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

by Don McGovern - from 'Workshop Manual for model plane builders'. It's a collection of article and plans edited on Flying Models from 1954 t0 1963 circa. Surely it appears in someone years Flying Model. regards,
Pit - 13/03/2015
Thanks, have added more detail now.
SteveWMD - 13/03/2015
Add a comment



Download File(s):


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.