Aegeus (oz4489)

 

Aegeus (oz4489) by Ron Warring from Aeromodeller 1930 - plan thumbnail

About this Plan

Aegeus. Glider model. Wingspan 42in, wing area 205 sq ins.

Update 29/12/2016: Replaced this model with a clearer copy, thanks to DBHL, theshadow.

Scan from DBHL, cleanup by theshadow.

ref DBHL-5005.

Direct submission to Outerzone.

Update 28/07/2020: Added article from the book "Model Gliders" by Ron Warring (1942), thank to RFJ.

Quote: "Simple Towline Glider - Aegeus, 42 in span. As we have seen in the design chapters we can bring about a reduction in the drag of a slabsider fuselage by making the top slightly wider than the bottom. This makes construction a little harder, since all the horizontal cross members now have to be cut with their ends at an angle, but a little patience should soon obviate this difficulty.

Sheet covering is used on the fuselage forward of the wings and this is strength and weight in the right place. The two 1/16 birch 3 ply formers make the fuselage particularly strong and, besides anchoring the wing fixings, makes for greater accuracy when joining the fuselage halves together.

Correct bracing of towing hook is important, as there is a considerable tension on this unit during launch, tending to tear it out of the fuselage.

Whilst correct trim may be obtained by shifting the wing forwards or backwards on the mountings our adjustable balance weight is included in the fuselage. To some this may appear redundant, but it serves as excellent practice for more advanced types where the wing position is usually fixed. In any case by moving the wings we are upsetting our side-area balance slightly and it is as well to get used to the fixed wing-position idea.

Construction: Fuselage: Two sides are first built and, to commence, two pairs of fairly hard 1/8 square balsa should be selected and one pair steamed to the curve of the top longeron, the other pair to the bottom longeron. These are then held in position on the plan by means of pins and the vertical spacers, also of square hard balsa, cut to the correct length and firmly cemented in position. The two halves are built together, one on top of the other, so that one is an exact duplicate of the other.

When the cement is set these halves may be removed from the plan and separated. Two formers, Nos. 4 and 6, are then cut out of birch 3 ply to the shape shown on the plan. Before fitting to the fuselage it is best to attach the wire wing mounts to these as the binding job is then much easier. The wire wing mounts are bent from 18 swg wire to the shape shown..."

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Aegeus (oz4489) by Ron Warring from Aeromodeller 1930 - model pic

Datafile:

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
  • Aegeus (oz4489)
  • Plan File Filesize: 516KB Filename: Aegeus_42in_DBHL_oz4489.pdf
  • Supplement Filesize: 2212KB Filename: Aegeus_42in_DBHL_oz4489_article.pdf
  • Supplement Filesize: 581KB Filename: Aegeus_42in_DBHL_oz4489_previous.pdf
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.