Republic P-47 Thunderbolt (oz4155)
About this Plan
Republic P-47 Thunderbolt. Rubber scale model WWII fighter plane.
Quote: "The Republic P-47 Thunderbolt, by JAF Halls.
LARGE numbers of Thunderbolt fighters are in service in this country and have earned high praise from the pilots flying them. Thunderbolts form the mainstay of the USAAF in Britain and, together with Mustangs and Lightnings, are often seen escorting formations of Fortresses and Liberators.
The Thunderbolt is of all-metal construction, the fuselage being a monocoque structure with light alloy stressed-skin covering. The wings and tail unit are covered with stressed-skin, with fabric over the movable control surfaces. A four-bladed Curtiss electric constant-speed airscrew is fitted and is driven by a 2,000 hp. Pratt & Whitney Double-Wasp eighteen-cylinder radial motor.
The following dimensions have just been received from the manufacturers, and it will be noted that the length is considerably greater than the figure quoted earlier: span, 40 ft 9-5/16 in; length, 35 ft 5-3/16 in.
Thunderbolts carry the usual drab camouflage on the sides and upper surfaces, while the undersides are light grey. The national marking is carried on each side of the fuselage and usually above and below both wing tips. In common with other US types, Thunderbolts are now appearing in their original metal finish.
Construction. Fuselage. Cut keels from 1/16 in sheet substitute, cut half formers from 1/16 in sheet balsa. Pin keels on the plan, cement on left half formers, add stringers. The rear motor peg fixing is from 1/16 in sheet, grain running vertically..."
Quote:- "Going this time to the October 1944 AEROMODELLER ...a scale rubber WWII fighter the REPUBLIC P-47 designed by J.A.F. HALLS. The plan is full size and it would build into an attractive model."
Update 27/03/2013: Replaced this copy with a better version of the plan, thanks to planeman.
Update 13/09/2021: Replaced this plan with a clearer copy (patterned background removed), thanks to TonyP.
Direct submission to Outerzone.
Supplementary file notes
Previous scan version.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Republic P-47 Thunderbolt
by JAF Halls
Scale Rubber F/F LowWing Military Fighter
all formers complete :)
got article :)
Found online 24/03/2013 at:
Format: • PDFbitmap
Credit*: algy2, planeman, TonyP
Republic_P-47_Thunderbolt | help
see Wikipedia | search Outerzone
ScaleType: This (oz4155) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.
If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.
ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Republic_P-47_Thunderbolt
Wikipedia page addresses may well change over time.
For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.
Do you have a photo you'd like to submit for this page? Then email email@example.com
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2021.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.