1/2A Cobra. CL stunt model. The original Cobra (oz6635) was a Steve Wooley design, circa 1967. This is a smaller, later, redrawn plan in PDFvector format.
Loucrane mailed in to say: "This is a reduced size, sheeted foam wing model for 1/2A engines. Wooley's original Cobra was of I-Beam wing structure, span about 50+ inches, for Fox 35."
The plan legend says: "Cobra - designed by Steve Wooley adapted to 1/2A by Howard Sullivan. CAD by Gene Rock 2004".
Did we get something wrong with this plan? That happens sometimes. Help us make a correction
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2018.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.