Cadet Fighter (oz3353)


Cadet Fighter (oz3353) by Dick Ealy from Flying Models 1951 - plan thumbnail

About this Plan

Cadet Fighter. Simple profile rubber ROG model by Dick Ealy. Build in two hours. (Note this plan also comes with a second smaller model, named ROG, also printed on the same sheet. ROG by Bob Buragas). This plan was printed in Flying Models Decade of Designs (1), published 1960.

Direct submission to Outerzone.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Cadet Fighter (oz3353) by Dick Ealy from Flying Models 1951 - model pic

  • (oz3353)
    Cadet Fighter
    by Dick Ealy
    from Flying Models
    December 1951 
    24in span
    Rubber F/F
    clean :)
    all formers complete :)
  • Submitted: 20/09/2012
    Filesize: 323KB
    Format: • PDFbitmap
    Credit*: hogal

Do you have a photo you'd like to submit for this page? Then email

User comments

The picture is from the model I made. Goes nicely too. I built it about a year ago from the outer zone plans and posted the pictures of it sitting on our dinner table on the FFScale site.
PaulHelman - 07/07/2015
The prop was one carved by the great Jim Noonen of Milwaukee who was selling off some of his material about 15 years ago.
Paul - 10/07/2015
Add a comment



Download File(s):


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.