Isotope III (oz3036)
About this Plan
Isotope. Free flight power duration model for 1 - 1.5cc motors. Model Aircraft, May 1956.
Quote: "For one to one point fine engines. An easy to build power duration model of 44 in wingspan. Isotope, by W Woodrow.
THIS easy to build power duration model features anti-warp, geodetic wing and tail structures, plug in undercarriage, and has a good all-weather perlbrmance.
Fuselage. Make the tank from thin sheet tin and brass tube. Now cut out K1 and formers F5 to F9 and cement them into position on K1. Cut out F1 and F1A and cement together. Make the rest of the formers and fin, also the undercarriage box and bind it with sellotape.
Cut out the base, mark the position of the formers, and pin to the plan Now cement the keel and former assembly to the base. Join the FIA assembly to F2 with the engine hearers, at the same time positioning the tank between them. Now add the rest of the formers, fin and sheet tail support, and fill in between F9 and F10 with soft block. The undercarriage box can now be added, also the pylon braces.
Sheet in the sides of the pylon as shown, and cement neoprene tubing to the upper vent of the tank and pass up and over the lower pylon brace and hold in place as shown, making sure that the orifice is facing into the slipstream. Now add K2 and cement the braces to it. Finally cement into place the soft nose block. When the entire fuselage has set, lift from plan, sand the nose block to shape and the tail support to conform with the fuselage outline. Add the wing and tailplane dowels and the platforms of same. Then finally cement into place the underfin.
The undercarriage is quite straight forward and if required is made from 14 SWG piano wire and plugs into the box in the fuselage.
Wings and tailplane. Warren Girder construction is used, for like most modellers, I hate the necessity of pinning wings down when doping, also there is no danger of future warps. The wings are built as follows..."
Supplementary file notes
Planfile includes article.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz3036)
Isotope III
by WP Woodrow
from Model Aircraft
May 1956
44in span
IC F/F Pylon
clean :)
all formers complete :)
got article :) -
Found online 15/06/2012 at:
http://www.rcgroups.com/forums/showpost.php?p=21898940...
Filesize: 388KB
Format: • PDFbitmap
Credit*: aeromeddeler
Downloads: 1527
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
No comments yet for this plan. Got something to say about this one?Add a comment
- Isotope III (oz3036)
- Plan File Filesize: 388KB Filename: Isotope_oz3036.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.