Minx (oz2400)
About this Plan
Minx. Free flight rubber duration model.
Note planfile includes 2 more pages, showing redrawn printwood ribs and parts.
Quote: "This model incorporates very simple constructional methods, as most of the parts can be built directly over the plan. This kit follows the usual Frog practivce of supplying most of the parts cut to shape and numbered to correspond with the drawing, leaving very little shaping to be done. The pre-cut parts can be eased out of the panels with a balsa-knife, or a razor-blade broken in two to obtain a point. Pin the drawing to a flat board to work on, and cover it with a sheet of greaseproof paper..."
Update 29/10/2017: Replaced this plan with a clearer copy, thanks to Pilgrim.
Direct submission to Outerzone.
Supplementary file notes
Printwood parts.
Previous scan version.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz2400)
Minx
from Frog
1952
30in span
Rubber F/F Cabin Kit
all formers complete :)
-
Found online 08/02/2012 at:
http://www.houseoffrog.co.uk/rubber_plans.htm
Filesize: 1067KB
Format: • PDFbitmap
Credit*: Andrew Derby, Mike Stuart, Pilgrim







Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Some more pictures, now from the Frog Minx [model photo & more pics 003].Jef - 22/04/2016
I attach 3 photos of a Frog Minx, newly built from a plan downloaded from Outerzone which you may like to use [more pics 005-007].
Michael_Gayfer - 17/04/2019
Good afternoon Mary. Seasons greetings. I hope you are both doing ok. A couple of pictures attached of the Frog Minx from your plan oz 2400 [pics 008, 009]. Only alterations are detachable landing gear and additional bracing struts for windscreen. Stay safe. Very best regards,
Trevor Tabor - 02/01/2021
Add a comment
- Minx (oz2400)
- Plan File Filesize: 1067KB Filename: Minx_Frog_oz2400.pdf
- Supplement Filesize: 700KB Filename: Minx_Frog_oz2400_previous.pdf
- Supplement Filesize: 34KB Filename: Minx_Frog_oz2400_printwood.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2021.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.