SNCASE SE.161 Languedoc (oz17082)
About this Plan
SNCASE SE.161 Languedoc. Free flight scale model for rubber power. Wingspan 36 in.
Quote: "LE SUD EST SE.161 LANGUEDOC.
The SNCASE SE.161 Languedoc was a French four-engined airliner produced by SNCASE (Sud-Est). Developed from the Bloch MB.160 and known in the late 1930s as the (SNCASO) Bloch MB.161, the SE.161 was in service with Air France and the French military after World War II... [for more type history, see build notes]
CONSTRUCTION
I suggest you cover your plans with wax paper or plastic kitchen wrap to protect your plans from gluing your balsa to the plans.
WING: I usually like building wings before the rest of the model. So here’s the wing build. The wing is built using the Dave Rees’ Sliced Rib method. Mike Stuart has a great tutorial on this method on his site. Here’s the link: https://www.ffscale.co.uk/rees.htm This builds a light strong wing. Use the dimensions as noted on the plans for this construction.
NACELLES: The cowlings/nacelles are next. Mike Stuart has a great tutorial on building radial engine cowls here: https://www.ffscale.co.uk/cowling.htm The nacelles are built box style with 1/16”sq longerons, uprights and cross member. The sides are built one on top of each other after the first side dries to ensure identical side to make the nacelles. The sides are inverted and built over the plan view of the nacelles and add the cross members.
FUSELAGE: The fuselage is built using the Ladder Jig method. The formers are 1/16” sheet balsa. Maxfliart has a terrific tutorial on YouTube in his build of the Beechcraft Staggerwing Twin here: https://www.youtube.com/watch?v=1yUYY1dqfH8
I often use laminated balsa strips instead of the 1/16” sheet formers. The laminated formers are made using 1/32”x1/16” strips of balsa with alphatic glue like white glue or TiteBond with water soaked balsa strips. When dry remove from the former templates. The choice is yours.
EMPENNAGE: The horizontal stab is built using 3/32”sq and sheet balsa. The stab is split in the middle to raise the tips 1”. The vertical fins are made of 1/16” sheet balsa. You’ll need to sand the proper angle in the stab’s tips to keep the vertical fins straight up.
Martin K. has asked for this plan of an early French airliner. Gotta love those twin tails!! Thanks Martin for this request, it was a fun airliner to research and draw.
Regards,
Tom Akery"
Direct submission to Outerzone.
Supplementary file notes
Build notes.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
SNCASE_SE.161_Languedoc | help
see Wikipedia | search Outerzone
------------
Test link:
search RCLibrary 3views (opens in new window)
ScaleType: This (oz17082) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.
If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.
Notes:
ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/SNCASE_SE.161_Languedoc
Wikipedia page addresses may well change over time.
For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Hi Tom,thank you for making us this gift! I doubt if I will tackle this project in the near future, but as a HLG, it should be feasible "soonish".
Cheers, Martin
Martin K. - 25/10/2026
First of course thank you very much for your great job, Mr Akery. Second I am not very happy with your Languedoc's fuselage cross sections or as we say in French sections du fuselage. There are naturally many very different drawings on the Internet available on the SE.161, but one I consider very reliable is the one published by Wikimedia Commons (3-view silhouette) based on the generally reliable source 'Observer's Book of Aircraft from 1952. Another source is the French magazine Le fanatique de l'aviation. The three-view in these both publications show a frontal view much more squary than your drawings. Please don't missunderstand my comment, I am far away from any insult towards you, but this had to be said if we support the real thing what we should. I wish you a sunny and friendly Sunday.
Robert Schlickewitz - 25/10/2026
Two kinds of people in this world... those who give and those who take. Of those who take, there are two kinds... those who are grateful and those who complain. To those who complain I say - if you want it done a certain way, roll up your sleeves and do the dirty work yourself.
RC Yeager - 25/10/2026
No good deed ever goes unpunished.
JimHales - 26/10/2026
Wish I'd known about those 3vues before I started! Should be easy enough to square up those formers with a pencil.
Tom Akery - 26/10/2026
Add a comment
- SNCASE SE.161 Languedoc (oz17082)
- Plan File Filesize: 829KB Filename: SNCASE_SE.161_Languedoc_oz17082.pdf
- Supplement Filesize: 161KB Filename: SNCASE_SE.161_Languedoc_oz17082_build_notes.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2026.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.