Sky Devil (oz17048)
About this Plan
Sky Devil. Control line stunt model. Wingspan 47 in, for Fox 35 engine.
Direct submission to Outerzone.
Update 8/10/2026: Added article, thanks to Pit.
Quote: "A fast, dependable model that can go through every stunt in book. Sky Devil, by Larry Scarinzi.
The Sky Devil is the result of our effort to make a clean-looking and really good stunt model which is as simple and quick to build as possible. In other words it was designed to give the most in appearance and performance for the least effort.
To achieve this result, we had to draw on a five year's accumulation of ideas. Back during the 1951 Plymouth Internationals George Aldrich was discussing his then new Combateer model with us. An interesting feature of this model was the lack of sheet covering on the leading edge and the use of only a 1/2 in square mainspar. A short wing was used so that the air loads would not have uficient leverage to break the wing.
Since that meeting we've built several box-type stunt models using only 1/2 in square spars to test the soundness of this method in a longer span wing. The results were good and to date we have never had a wing of this type break in flight. We should emphasize that all of the wings tested were silk covered and we certainly advise using this covering when building the Sky Devil.
Late in 1954 we suddenly got the urge to fly a brand-new model in the Far Hills, NJ meet, then only a week away from the time of our decision. We wanted a reasonabiy good looking ship and something which was simple so that we could complete it in time for the contest. The ship we designed featured an inverted engine, straight wing, and a 1/2 in balsa mainspar. In error, we over extended the nose moment arm which made, the ship turn very wide. Disappointment caused us to go to the meet and fly an old model.
Six months later our interest returned and we sawed off 1 inch of the nose moment. This proved enough to tighten the turn to our satisfaction. Late in 1955 the pressure of work let up enough for us to get to three North Jersey Stunt contests. Our old-new ship payed out by winning two Firsts - one of these being the Far Hills, New Jersey meet for which it was designed a year before.
We analyzed the design and decided that the next logical step would be to eliminate the center wing sheeting. In fact, it became apparent that it was not necessary to build a separate wing. All we needed to do was cut a few holes in the fuselage and slide the spars through..."
Update 8/10/2026: Added complete article (now includes page 13), thanks to Pit.
Supplementary file notes
Article.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz17048)
Sky Devil
by Larry Scarinzi
from Flying Models
December 1956
47in span
IC C/L
clean :)
all formers complete :)
got article :) -
Submitted: 16/09/2026
Filesize: 806KB
Format: • PDFbitmap
Credit*: dfritzke
Downloads: 214
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
No comments yet for this plan. Got something to say about this one?Add a comment
- Sky Devil (oz17048)
- Plan File Filesize: 806KB Filename: Sky_Devil_oz17048.pdf
- Supplement Filesize: 2276KB Filename: Sky_Devil_oz17048_article.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2026.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.