Leduc RL.21 (oz17042)

 

Leduc RL.21 (oz17042) by Tom Akery 2026 - plan thumbnail

About this Plan

Leduc RL-21. Free flight scale model for rubber power. Wingspan 27 in.

Direct submission to Outerzone.

Quote: "LEDUC RL-21.

The Leduc RL.21 was a single engine, single seat light aircraft built in the late 1950s in France. Designed to achieve high speeds from modest engine power, it set seven class records in the early 1960s [for more type history, see build notes].

CONSTRUCTION:

FUSELAGE: The fuselage is built using the box method. First be sure to cover the plans with kitchen plastic wrap, wax paper or similar clear material. This will keep the balsa from sticking to the plan as you glue it together. The box sides are constructed with 3/32”sq longerons, uprights and cross members. To save some weight the cross members can be 1/16” sq. Build the side flat on the building board, when dry build the second side over the first to make sure you have two identical sides constructed. Don’t forget to add the wing saddles on each side for locating the wing later. The wing will be slid through the fuselage after the wing is built. I like to use the plastic kitchen wrap between the sides to keep them from sticking toghther. Once you have both side constructed build the box by inverting the sides and building them over the plan view of the fuselage. I like to use rt. Triangles to keep the sides vertical as the cross members are added to the sides. I like to start in the middle at the wing area and move towards the nose first. Then add the cross members toward the rear. Once the box is built and dry flip over the box and add he 1/16” sheet top formers that round out the top of the fuselage.

WING: The wing is built using the Dave Rees’ Sliced Rib method using the dimensions noted on the plan for L.E., T.E., spars and trusses. Mike Stuart has a very good tutorial on this method on his site here: https://www.ffscale.co.uk/rees.htm

EMPENNAGE:

HORIZONTAL STAB: The h.z. stab is constructed using 3/32” sq balsa. Not shown on the plan is the additions of 3/32”sq ribs over the stab ribs and sand these to airfoil shape helping to keep this stab from warps.

VERTICAL STAB: The v.t. stab is constructed in what I like to call “In the Air” once the outline of the v.t. stab is completed on the building board it is lifted and the v.t. spar is attached to the bottom of the stab’s cap, make sure to keep it centered with the outline of the stab. Once it’s secure begin adding the outer 1/32”x1/8” balsa strips at the designated places on the stab working from the top of the stab to the base. Alternate from side to side as you work to the base of the stab. This gives a strong, light and fuller looking stab.

I hope you find this plan a fun model to build and fly.
Regards,
Tom Akery/Sky9pilot"

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

No model pic found for this plan

Datafile:
  • (oz17042)
    Leduc RL.21
    by Tom Akery
    September 2026 
    27in span
    Scale Rubber F/F LowWing
    clean :)
    all formers complete :)
  • Submitted: 24/08/2026
    Filesize: 618KB
    Format: • PDFvector
    Credit*: TomAkery
    Downloads: 216

ScaleType:
  • Leduc_RL.21 | help
    see Wikipedia | search Outerzone
    ------------
    Test link:
    search RCLibrary 3views (opens in new window)


    ScaleType: This (oz17042) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Leduc_RL.21
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Thank you Tom and all for publishing this racy little gem! I was happy to see it still exists and is on display at the Musee Espace Air Passion in Anger / France: https://www.musee-aviation-angers.fr/post/le-leduc-rl-21-rejoint-espace-air-passion
Cheers, Martin
Martin K. - 07/10/2026
I followed up the museum link, and wow the real thing does have that dihedral and slighty splayed uc legging!! Lovely, now where can I get some lightweight Bacofoil?!!
JimP - 04/11/2026
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2026.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.