KA8b (oz15551)
About this Plan
Schleicher KA8b. Radio control scale model glider. Wingspan 1.5 m. Scale is 1/10.
Quote: "Classic glider for the slope, flat filed or aerotowing, witha added transportability. KA8b, by Dave Ridgeway.
With well over a thousand built between 1958 and 1976, the Alexander Schleicher Ka8 became one of the all-time classic post-war gliders. Developed from the earlier and more complex Ka6, the Ka8 was simpler and less expensive to produce; other aerodynamic modifications were carried out to make the Ka8 an ideal training machine. With such a high production, the Ka8 is still a familiar sight throughout Europe, many trainee pilots taking their first solo flight in one. The Ka8 employed an easier to produce fabric-covered steel-tube fuselage, replacing the complex wooden monocoque of the Ka6. Flying surfaces are conventional fabric covered wooden construction.
Specification: span: 15m; length: in; Wing Area: 1415sq.m; Wing Section: Go 533 17% (root), Go 532 (tip); weight: 310Kg, Designer: Rudolf Kaiser.
Traditional model for the modern era: With the ready availability of mini and micro RC gear, the smaller scale 'mini glider' becomes an attractive proposition, being easy to transport - even on foot or cycle - and offer the possibility of aerotowing with even quite small electric tugs. However, the temptation is always to go too small - OK on the slope, but not for aerotow - unless you use a gas turbine tug!
A scale of 1/10 was chosen as an ideal compromise between performance and portability, the latter further enhanced in this design with knock-off wings and detachable tailplane and fin - enabling the model to be stored in quite a small 'hangar' for safe transport.
To me, the Ka8 is the epitome of the classic post-war sailplane, especially with the later type (larger) moulded canopy and cute snub nose, The fabric-covered fuselage proved very easy to reproduce with a sheet balsa covered structure; the wing however was the focus of a great deal of attention. Typical of the period the full-size machine uses the then universally popular Gottingen GO 533 (root) and 532 (tip), which becomes problematical at a 4 in average chord. After literally weeks of study and deliberation, a thinner more penetrative modern section was decided on which works well, both on the slope and at low wing loadings for towing applications, despite being considerably more difficult to construct accurately with high strength and low weight. Result? Traditional modelling and great satisfaction!
Construction: Important, take care with wood sizes. Please note the plan is drawn in metric sizes - if using imperial or mix of imperial and metric, please adjust dimensions accordingly.
This model is a really satisfying build for the traditional builder, albeit not for the novice, but suitable for those with a few projects under their belt. It cannot be stressed too highly that wood selection is of great importance - do follow advice given on the plan.
I always start with the tail surfaces, it gets me in to building mode and means when the project is gaining momentum these small irritating, but vital parts are done and dusted. In this case, the tail surfaces are simple frames built over the plan and sanded to section. It is important to keep both tailplane and fin as light as possible. The tailplane is retained by a single 3-4mm nylon wing bolt, allowing easy adjustment of incidence and ease of transport..."
KA8B from R/C Model Flyer, June 2005.
Direct submission to Outerzone.
Supplementary file notes
Article.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz15551)
KA8b
by Dave Ridgway
from RC Model Flyer
June 2005
59in span
Scale Glider R/C
clean :)
all formers complete :)
got article :) -
Submitted: 07/09/2024
Filesize: 865KB
Format: • PDFbitmap
Credit*: Circlip, RFJ
Downloads: 874
-
Schleicher_K_8 | help
see Wikipedia | search Outerzone
------------
Test link:
search RCLibrary 3views (opens in new window)
ScaleType: This (oz15551) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.
If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.
Notes:
ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Schleicher_K_8
Wikipedia page addresses may well change over time.
For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Nice and interesting plan. Thank you. Still, it looks a bit strange here and there. Small curves and lines are missing, bigger curves are polylines etc.So, was it really published this way or is it some sort of DXF autotrace?
Hubert - 22/09/2024
Add a comment
- KA8b (oz15551)
- Plan File Filesize: 865KB Filename: KA8b_oz15551.pdf
- Supplement Filesize: 1098KB Filename: KA8b_oz15551_article.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.