Albatros D-II (oz15291)

 

Albatros D-II (oz15291) 1972 - plan thumbnail

About this Plan

Albatros D-II. Free flight scale model German WWI fighter biplane. Peanut scale, wingspan 13 in.

Planfile includes printwood and patterns.

Quote: "Albatros D-II. Assembly Instructions: Cut all parts from balsa sheets, leaving paper patterns attached until just before using part. This keeps small thin parts from splitting, and there is no printing on parts when assembled.

I would recommend using a resin glue such as 'Se-cur-it' or 'Tite-bond' since they do not shrink while drying (which would warp these thin sections). Cover plans with wax paper or Handiwrap before using to prevent glue from sticking to plans.

Construct wings over plans using parts as noted, with 3/32 sq balsa leading edge and 1/32 sq basswood spars. Add blocks to upper and lower wings for the struts. Rib T1 is glued in after dihedral is set. Both wings should have 1/2 in dihedral each side plus 1/16 washout. Cover wings with tissue and water shrink (be sure tissue is cemented to ribs where struts attach), pin wings onto plans with blocking while drying to prevent warps and assure washout. When dry, drill holes in wing blocks where shown to receive struts. Assemble interplane struts with 1/32 sq and 1/32 x 1/16 basswood as shown and spot glue Temporary Strut Jigs to maintain alignment untill wings are mounted. Leaving lower wing pinned to plans, glue on interplane struts and then upper wing. Let dry thoroughly.

Construct tail sections over plan using strip stock as noted. This type of construction is very light and strong if joints are accurately cut and glued. Select the lightest balsa for these parts. Trim outside edges to smooth contour before covering. Water shrink tissue, pinning parts to blocks to prevent warping while drying.

Construct two fuselage sides over Side View (frames shown hatched for clarity) then assemble together over plan, cementing in cross pieces where indicated by black dot on side view. Glue on top and bottom formers and cover top and bottom surfaces with stiff paper patterns provided. Cover fuselage with tissue, then glue on F13, F14 and engine cover. Cover with tissue and water shrink.

Assemble wing and tail surfaces to fuselage checking for proper alignment. Make landing gear struts over side view and assemble to fuselage as shown. Wheels of balsa are provided; however, plastic and rubber wheels of vintage scale are available at your Hobby Dealers. Install wire skid.

Carve nose block and drill hole for thrust button (note downthrust) side thrust may be accomplished with ships later. Bend winding hook as shown, assemble wire, prop, thrust button and noseblock as shown, then bend rubber motor loop in end of wire. Tie ends of rubber motor together (lubricate with castor oil or rubber lube, except for knot) and install in plane with knot at rear. This motor should be stretch wound for best results..."

Direct submission to Outerzone.

Supplementary file notes

Instructions.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Albatros D-II (oz15291) 1972 - model pic

Datafile:
  • (oz15291)
    Albatros D-II
    from Lees Hobbies
    1972 
    13in span
    Scale Rubber F/F Biplane Military Fighter
    clean :)
    all formers complete :)
  • Submitted: 01/05/2024
    Filesize: 667KB
    Format: • PDFbitmap
    Credit*: EricSpecht
    Downloads: 248

ScaleType:
  • Albatros_D.II | help
    see Wikipedia | search Outerzone
    ------------
    Test link:
    search RCLibrary 3views (opens in new window)


    ScaleType: This (oz15291) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Albatros_D.II
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.