P-47 Thunderbolt (oz15079)

 

P-47 Thunderbolt (oz15079) by Dan Santich 1976 - plan thumbnail

About this Plan

P-47 Thunderbolt. Radio control standoff scale model WWII fighter. Wingspan 60 in, wing area 720 sq in, for .60 engines.

Direct submission to Outerzone.

Quote: "Congratulations! You now own the most accurate R/C Stand-Off Scale kit ever produced. We at Top Flite hope that you will find this model the most pleasant to build, inspiring to look at and exciting to fly that you have constructed.

It is honest to point out, however, that while this model is no more difficult - in fact is simpler than most comparable kits to make, R/C Scale models generally are not for the newcomer to this hobby. Previous modeling experience and careful attention to craftsmanship are necessary. Even the 'old hand' will do well to study and follow the instructions and guidance given in this booklet. It is our aim to have you say: This is the finest model I have ever built.

Construction of P-47. Before You Start, Read This: The assembly sequence of your Top Flite P47 has been carefully developed to help assure the correct alignment of your model. Utilize the check-off blocks as you build; this will allow assembly of your model in minimum time.

Before beginning an assembly step, read the instructions to familiarize yourself with the parts to be used. Find the parts mentioned and double check them for proper identifi-cation and size with the plans. Do not separate parts from the die cut sheets until you need them. There are machined parts in your kit which are not identified, such as the fuselage siders, stab, ailerons, etc. These parts can be easily identified by checking the parts against the plans.

We are sometimes asked which glues are best for model construction. The answer to this depends upon the particular job. This is our normal recommendation: For all hardwood-to-hardwood or hardwood-to-balsa joints, use white wood glue. Titebond is especially good, as it dries faster than other white glues and is very strong. For balsa-to-balsa joints, regular balsa-wood cements are ample for the job, although white glue can be used here too.

Whichever type you use, remember that excess glue is no substitute for a well-fitting joint. Use a minimum of glee at all times, and wipe off excess glue that squeezes out of joints before it sets hard; when set it is difficult to remove, but if not removed it could spoil the covering job... "

Update 30/1/2024: Added kit review from Radio Modeller, January 1977, thanks to RFJ.

Quote: "RM Test Report. Thunderbolt P-47. A really de luxe kit by TopFlite from Ripmax - built and flown by Dave Cronin.

As stated when the contents were reviewed in last September's Trade News, this is certainly a de luxe kit. It makes up into a 60in span 'standoff' scale model of some 720 sq in wing area, for .50 to .61 motors. (The scale at this span is something just over 1/8).

Apart from a variation in density of some of the wood, the materials in the box are very good - the cowling and canopy being quite outstanding. The plan and instruction manual are very comprehensive, and I would advise even the more experienced modeller to study them well.

Getting it together: The lower half of the fuselage is built onto the engine bearers, pinned to the building board, the sides also being pinned down - and here I hit something of a snag. The top edges of the side sheets have a slight curve in them, from nose to tail, so cannot be pinned to the board all along. I overcame this by using packing. The 1/4 in sq cross members fit into notches in the top and bottom members, producing a rigid basic box structure.

The formers are halved, top-and-bottom, and glued onto this main box (when it begins to look more like an aircraft than a boat!) The indicated tailwheel position, incidentally, is not scale, so I mounted the assembly on a plate inside the fuselage and made it steerable via a pushrod off the rudder, as can probably be seen in one of the photographs.

The pre-formed balsa shells or skins are a feature of this kit - and avoid the need for tedious planking - but do, themselves, require care and patience to fit properly. They are well oversize but, nevertheless, care is required. The bottom rear shells went on easily; then one of the top shells. The problem is the last one, as one cannot get a hand inside the fuselage to pull it about! I think I spent more time fitting this one than the others put together..."

Update 30/1/2024: Added kit review from RCM, April 1977, thanks to RFJ.

Update 30/1/2024: Added kit review from Flying Models, January 1977, thanks to RFJ.

Supplementary file notes

Instructions.
Reviews.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

P-47 Thunderbolt (oz15079) by Dan Santich 1976 - model pic

Datafile:
  • (oz15079)
    P-47 Thunderbolt
    by Dan Santich
    from Top Flite (ref:RC-19)
    1976 
    60in span
    Scale IC R/C LowWing Military Fighter Kit
    clean :)
    formers unchecked
  • Submitted: 16/01/2024
    Filesize: 811KB
    Format: • PDFbitmap
    Credit*: Marc
    Downloads: 776

ScaleType:
  • Republic_P-47_Thunderbolt | help
    see Wikipedia | search Outerzone
    ------------
    Test link:
    search RCLibrary 3views (opens in new window)


    ScaleType: This (oz15079) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Republic_P-47_Thunderbolt
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

P-47 Thunderbolt (oz15079) by Dan Santich 1976 - pic 003.jpg
003.jpg
P-47 Thunderbolt (oz15079) by Dan Santich 1976 - pic 004.jpg
004.jpg
P-47 Thunderbolt (oz15079) by Dan Santich 1976 - pic 005.jpg
005.jpg
P-47 Thunderbolt (oz15079) by Dan Santich 1976 - pic 006.jpg
006.jpg
P-47 Thunderbolt (oz15079) by Dan Santich 1976 - pic 007.jpg
007.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

I've been looking for this plan for a long time, so thanks to whoever shared it!
J.-M. Baertschi - 02/02/2024
Add a comment

 

 
 

Download File(s):
  • P-47 Thunderbolt (oz15079)
  • Plan File Filesize: 811KB Filename: P-47_Thunderbolt_oz15079.pdf
  • Supplement Filesize: 630KB Filename: P-47_Thunderbolt_oz15079_instructions.pdf
  • Supplement Filesize: 1527KB Filename: P-47_Thunderbolt_oz15079_review_FM.pdf
  • Supplement Filesize: 1867KB Filename: P-47_Thunderbolt_oz15079_review_RCM.pdf
  • Supplement Filesize: 1305KB Filename: P-47_Thunderbolt_oz15079_review_RM.pdf
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.