Rearwin Speedster (oz14966)


Rearwin Speedster (oz14966) 1938 - plan thumbnail

About this Plan

Rearwin Speedster. Free flight model for rubber power. WIngspan 24 in.

Originally kitted in the 1930s by Peerless. This here is a later reprint from Golden Age.

Quote: "General Instructions For Assembly: Construction begins with the fuselage. Cut the formers from the printed wood and sand them to the center of the printed line. Make two fuselage sides as outlined on the side view. These must be exact size.

Next cut cross braces from the 1/16 sq stock using the top view plan as a guide. Now assemble the two sides with the cross braces, setting these in at 'X' on the side view. Glue in all diagonal braces when making the sides. Cement in the formers according to their numbers, connect them with the stringers.

Sand the entire fuselage when completed smoothing off any uneven joints which cause the paper to wrinkle. This also applies to the rest of the construction.

Wing building is much the same as the fuselage in that all parts are tut out, sanded, and assemb-led using the plan as a guide.

Covering is easy if the framework is sanded smooth, as mentioned above. Use Tissue Cement as the adhesive, working with a small brush. Paper is applied with the grain running from tip to tip on the wings and from nose to tail on the fuselage Use small pieces of tissue, making neat laps wherever a break occurs in the lines of the structure. Use separate pieces of paper between formers on the fuselage. Always cover the model's separate parts before assembly, adding all details such as license numbers, cabin windows, etc.

Test the completed model by gliding. If it stalls, noses up, weight the front, just inside the nose-block with short pieces of wire solder, etc, to enable the plane to make a smooth easy glide. The bottom of the fuselage at the front may be left uncovered for a time to facilitate this. Wind the rubber, then about 150 turns, let the plane go at low altitude for more testing..."

Direct submission to Outerzone.

Supplementary file notes



Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Rearwin Speedster (oz14966) 1938 - model pic

  • (oz14966)
    Rearwin Speedster
    from Golden Age Reproductions, Peerless
    24in span
    Scale Rubber F/F Cabin Kit
    clean :)
    all formers complete :)
  • Submitted: 22/11/2023
    Filesize: 762KB
    Format: • PDFbitmap
    Credit*: RogerB
    Downloads: 436

  • Rearwin_Speedster | help
    see Wikipedia | search Outerzone
    Test link:
    search RCLibrary 3views (opens in new window)

    ScaleType: This (oz14966) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.

    ScaleType is formed from the last part of the Wikipedia page address, which here is
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email

User comments

Doh. Have added the missing oz serial number to these filenames now.
SteveWMD - 04/12/2023
Add a comment



Download File(s):
  • Rearwin Speedster (oz14966)
  • Plan File Filesize: 762KB Filename: Rearwin_Speedster_24in_oz14966.pdf
  • Supplement Filesize: 567KB Filename: Rearwin_Speedster_24in_oz14966_printwood.pdf
  • help with downloads


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.