Fabulous Hawk (oz14950)

 

Fabulous Hawk (oz14950) by Walt Musciano 1953 - plan thumbnail

About this Plan

Fabulous Hawk (Curtiss P-6 Hawk). Control line scale model biplane fighter. Ohlsson & Rice .29 shown.

Direct submission to Outerzone.

Update 26/11/2023: Added article, thanks to Pit.

Quote: "Before we begin to describe the construction of this replica, it is with great appreciation that we thank Mr. GA Page for his kind assistance in providing important data. Mr. Page is the former chief engineer of the Airplane Division of Curtiss Wright (they stopped making airplanes in 1950) and is the designer Of the original Hawks, and project engineer on most of the later Hawk modifications!

Any engine from .19 to .35 can be sucessfully used to power this 252 sq in model. Several engine installations have been illustrated both upright and inverted and in beam and bulkhead mountings. Plans also include sufficient information to enable the builder to construct any of the famous Hawk. We built the P-1 B and our color scheme and markings are authentic for the 43rd School Squadron.

Cut two fuselage sides and formers to shape and join fuselage in rear as top view shows. Clamp this joint and insert former E in place. Cement well. Gently bend sides as shown and insert former D. Dampen outer side of fuselage sides if they resist bending. Install remaining formers and plywood firewall. Cement beam mounts in place if they are desired. Bend landing gear to shape and bind all joints with fine soft wire and solder well. This assembly is firmly cemented to plywood foundation and wrapped with crinoline or gauze and smeared with several coats of cement, Entire landing gear is now securely cemented into fuselage. Cement bellcrank mount into fuselage, using plenty of cement.

Cut tail surfaces to outline shape and sand to a streamline cross section. Cement elevators to dowel spar. When dry, firmly attach control horn to dowel and then hinge elevators to stabilizer, using crinoline or heavy fabric. Cement stabilizer to fuselage and, while this is drying, bolt bellcrank to mount. Bend music wire control rod ends as shown. Trim rear of fuselage for horn movement. Attach control rod to control horn and bellcrank. Solder washers to control rod ends to prevent it from slipping off horn or bellcrank.

Fuselage bottom is covered at this time. Grain should run across fuselage and not lengthwise. Be sure to leave slot in fuselage bottom uncovered. Lower wing joiner fits in this slot later.

Fit engine and fuel tank into nose. Many commercial fuel tanks will fit into space provided: Extend vent and filling lines as required.

Cut cabane struts from hardwood and spot cement them to inside of fuselage sides. See front view. Now, when dry, fillet this joint with plastic wood. This forms a virtually indestructible joint. The soft balsa fuselage top is cemented in place. This is followed by nose block. Carve nose to shape, being certain to fair it into spinner used. The scale spinner is indicated; its shape falls in between standard commercial aluminum spinners and needle-nose type..."

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Fabulous Hawk (oz14950) by Walt Musciano 1953 - model pic

Datafile:
  • (oz14950)
    Fabulous Hawk
    by Walt Musciano
    from Model Airplane News
    January 1953 
    42in span
    Scale IC C/L Biplane Military Fighter
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 04/11/2023
    Filesize: 777KB
    Format: • PDFbitmap
    Credit*: dfritzke
    Downloads: 292

ScaleType:
  • Curtiss_P-6_Hawk | help
    see Wikipedia | search Outerzone
    ------------
    Test link:
    search RCLibrary 3views (opens in new window)


    ScaleType: This (oz14950) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Curtiss_P-6_Hawk
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Fabulous Hawk (oz14950) by Walt Musciano 1953 - pic 004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.