Northern Line F1A (oz14893)

 

Northern Line F1A (oz14893) by Mike Cook 2003 - plan thumbnail

About this Plan

Northern Line F1A. Free flight competition glider model. Wingspan 2.15 m.

Direct submission to Outerzone.

Update 29/10/2023: Added article, thanks to RFJ.

Quote: "Northern Line. Mike Cook's up-to-date F1A, ideal for the new season's free flight glider competitions

Mike Cook currently flys with the Maidstone Free Flight Group (MFFG) but hails from the Hull area of Yorkshire, hence the 'Northern Line' design name. During his 20 years of contest flying he has concentrated mostly on Glider and particularly F1A (A/2), achieving some notable successes - the Northern Gala, Nordic Trophy, SMAE Cup and Stonehenge Cup amongst others. In 2000 he made his first British team place for the European Championships and is firmly committed to the 'Modern' Bunter style F1A model.

The design featured here is the result of all that experience and would ideally suit the contest flier who wants to move on from the more traditional model to the high-tech. For those who are still not sure about 'bunting' a more basic 'zoom' launch fuselage version is also included on the plan.

Northern Line is designed and intended as something of an all-rounder. At 2.15 metres wingspan it could hardly be categorised as either a still air 'super-dooper' or windy weather 'clunk'; yet it takes these extremes - plus the middling conditions - easily in its stride. The model described and drawn in this article began life back in 1983 and has slowly evolved since then. The first carbon fibre version was built in 1994 and is still flying today. The plans presented in this article contain different fuselages for a zoom launch and bunt launch version of the model. I would recommend that you consider trying the bunt option in order to get the most from this design, but zoom launches would be quite acceptable if this is your first high-tech model and you want to 'test the water' slowly.

Carbon fibre and Kevlar: I'm sure that most people who've made the transition from wooden models to composite structures will agree that carbon fibre is, at best, unpleasant to work with. However, harnessing its considerable tensile strength within airframes has produced a new generation of extremely robust models with enhanced aerodynamic efficiency and, particularly for F1A, the strength to withstand high speed, height gaining launches. I've built four Northern Lines in the last nine years and they're all still flying competitively - this would not be the case with wooden models. Until recently I did use Kevlar cloth for the wing tip and tail shells; carbon cloth is far better.

Moulding carbon fibre cloth: Having decided to make the transition from wooden to carbon fibre models I invested in two modelling aids from Joe Maxwell of Scotland. Joe recently retired though it is still possible to purchase, or make, similar items to the ones described below. The first was a 'V' press with a leading edge radius of 1.5mm. This enables me to produce the 'taco' shells (D-boxes) for both the wing and tailplane. The procedure is very straightforward; just follow these steps..."

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Northern Line F1A (oz14893) by Mike Cook 2003 - model pic

Datafile:
  • (oz14893)
    Northern Line F1A
    by Mike Cook
    from Aviation Modeller International
    April 2003 
    84in span
    Glider F/F
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 04/10/2023
    Filesize: 510KB
    Format: • PDFbitmap
    Credit*: theshadow
    Downloads: 505

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
  • Northern Line F1A (oz14893)
  • Plan File Filesize: 510KB Filename: Northern_Line_F1A_oz14893.pdf
  • Supplement Filesize: 4009KB Filename: Northern_Line_F1A_oz14893_article.pdf
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.