Demon King (oz13950)

 

Demon King (oz13950) by AE Burch 1950 - plan thumbnail

About this Plan

Demon King. Control line stunt model.

Quote: "THE Model is the result of experience gained during eighteen months of progressive training in Stunt flying. The designer's first attempts, soon after Xmas 1948, were with a boxcar type of model and with this he advanced as far as loops, bunts, horizontal eights and inverted flight.

Following this, a kit job was soon written-off and the forerunner of Demon King, by name Elfin King, was designed for the Northern Heights Gala. Due to fuel feed trouble, it was unable to show its paces, but gave its designer many hours of flying in Camp. It was found to be very easy to control through all manoeuvres.

Having bought an Amco 3.5, Burch immediately scaled up his design, the result being Demon King. With the same performance characteristics combined with the ease of construction and great strength, this was the answer to all his problems and, on 60 ft lines this model was found to be smooth in all the stunts of the Schedule.

At the end of September last, the designer demonstrated with Demon King on the field at Eaton Bray, and the performance was all that could be wished for; the Aeromodeller's own CL addicts were most impressed. The designer suggests that first flights are made on 50 ft Light Laystrate lines, using a 9 by 6 prop. This will allow sufficient time to think about the manoeuvres, while giving plenty of 'feel' on the lines. The maximum line length advised is 60 ft, when familiar with the handling of the model. With the AmCo and a 9 by 6 prop, Demon King flies at between 60 and 70 mph, is easy to control, and any manoeuvre in the book may be attempted with confidence.

Notes on Construction: While the work entailed is perfectly straightforward the following pointers may be useful.

The assembly of bearers and Formers 1 to 4 is done first and after installation of bellcrank, lead-outs, push-pull rod and tank, the sides are added. The cowling is made next followed by the tail surfaces. The wings are built in three sections, assembled after the internal construction is completed.

Tailplane and fin are double-cemented to the fuselage; wing is attached with strong rubber bands."

Demon King from Aeromodeller, March 1950.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Demon King (oz13950) by AE Burch 1950 - model pic

Datafile:
  • (oz13950)
    Demon King
    by AE Burch
    from Aeromodeller
    March 1950 
    40in span
    IC C/L LowWing
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 07/07/2022
    Filesize: 1073KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.