Nesmith Cougar (oz13881)

 

Nesmith Cougar (oz13881) by Theodore Russell 1976 - plan thumbnail

About this Plan

Nesmith Cougar. Rubber scale model. Wingspan 30-5/8 in. Scale is 1/8

Direct submission to Outerzone.

Update 14/6/2022: Added article, thanks to Pit.

Quote: "For rubber-powered Scale, this design is large enough to use scale-position framework and yet fly like a bird. Nesmith Cougar, by Theodore C Russell.

The Cougar, a two-seat home-built craft, designed and constructed by Robert Nesmith, is made to order for Rubber Power Scale events. The full-size Cougar is simply constructed, and the model follows the scale framework for top Scale Fidelity points.

The ship possesses a fuselage length almost as long as its wingspan. This means a long, powerful, motor can be used for an extended prop run. The fuselage is nothing more than a box with four stringers. The wings and tail surfaces have the scale number of ribs and duplicate the full-size spacing.

The prototype has taken a first at the 1971 Cleveland Junior Air Races, a second at the 1972 Junior Air Races, and a seventh at the 1971 Erie (PA) Model Aircraft Assoc All Scale Meet. It should be pointed out that at the Erie meet, Flying Ace's rules were used. These rules give a 15-point bonus to low-wing ships, and deduct five points from a high-wing model. This 20-point handicap, together with no points for scale framework and rib spacing, was the cause of the low placing. At this contest the Cougar had three official flights of 35, 37, and 38 seconds in 15- to 20-mph winds. Normal flight times are about 45 seconds. The original weighs seven ounces, but could be built lighter.

A set of three-view drawings by James Triggs, and photos, including a color cover picture were in the February 1959 issue of American Aircraft Modeler. The model is 1/8 full-size, or 1-1/2 in to 1 ft scale. The model spans 30-5/8 in.

Construction: Construction begins by building two fuselage sides, then joining them with cross pieces. Note that the top of the fuselage is wider than the bottom. Short 1/8 balsa strips are used as gussets to maintain the correct cross section, and are installed as the sides are being joined. (See reference cross sections on plans).

The tail wheel wire strut is bent, bound, and cemented to a 1/8 sq strip. This is cemented to the tail post. The side and bottom stringers are added now, but the top stringer is not attached until the wing center section is mated to the cabin top.

Notch the stringers, where neccessary, to maintain the right height above the basic frame. Cement in the hard 1/8 sheet rear motor peg mounts. Face these on the inside..."

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Nesmith Cougar (oz13881) by Theodore Russell 1976 - model pic

Datafile:
  • (oz13881)
    Nesmith Cougar
    by Theodore Russell
    from Model Aviation
    July 1976 
    30in span
    Scale Rubber F/F Civil
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 21/04/2022
    Filesize: 768KB
    Format: • PDFbitmap
    Credit*: dfritzke

ScaleType:
  • Nesmith_Cougar | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz13881) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Nesmith_Cougar
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Light as a feather, very pretty hand-draughted plan. The lettering was labouriously written one by one with the help of stencils. The 'Nesmith Cougar' title looks like it is dry-rub letters, Letraset or Mecanorma. All as good as could be for the time. It can only be a fine flyer.
Miguel - 12/06/2022
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.