AT-6/Harvard Mailbox (oz13880)

 

AT-6/Harvard Mailbox (oz13880) by Alan Wooster 2022 - plan thumbnail

About this Plan

AT-6/Harvard Mailbox. Wingspan 28 in.

Note this is not a plan of a flying model. This is a mailbox.

Quote: "My wife and I built our (first)retirement home in Tauranga, New Zealand, back in 2003. On completion we needed a mailbox. I didn`t like any of the commercial offerings available and so decided I`d make my own. I was still very much into model aircraft - I guess that`s where the idea stemmed from.

I had a thing about Harvards then - still have. The RNZAF used them as their standard trainer for many years. Once redundant, many were sold off overseas, but a few were bought by private owners in New Zealand. One was bought by a local enthusiast and added to his small fleet hangared at Tauranga Airport. Robert also owned a Tigermoth, a DH Chipmunk and a couple more mundane GA aircraft - all in airworthy condition. I got to know him quite well and had rides in both the Tigermoth and Chipmunk around this time. His Harvard, picture here, retained the final official RNZAF colour scheme. I reckoned it is among the nicer colour schemes going, and the sight and sound of a dozen of them flying in formation is unforgettable.... I had built a couple of models of them around this time. One of them, also pictured here, started life as an unpainted CM Pro ARF and just had to be finished in this scheme also. I guess the move to the Harvard mailbox was a natural progression...

It served us well during our time in New Zealand and we eventually moved on about five years later. We built a new home over here in Australia and brought the mailbox with us. It got a full refurb at that time and then did another five year stint. After that we moved in to a retirement village. It became redundant then and was eventually passed on to a recycling facility and a new owner ....

This project was fabricated almost entirely from scrap materials sourced from a local builder's yard. He supplied the 8" dia. drainpipe for the fuselage and neatly cut it to size for me. The wings and tailplane were cut from scrap 9mm and 12mm marine plywood. It is important to use marine plywood here, regular interior or construction plywood won't last. Also, all metal fixings and fittings should be either galvanised metal or stainless steel for the same reason. Glue used was that messy polyurethane. It worked very well, but do cleanup immediately after use or you'll never get rid of it. The main paint finish was mostly brushed using the excellent small 'Resene' acrylic test-pots. The cowling was masked and painted with 'rattlecan' paint.

This prototype created much amusement during its lifetime. With a little imagination I can picture others along similar lines evolving - a Corsair maybe, or what about an F-86 Sabre?"

Direct submission to Outerzone.

Quote: "AT-6/HARVARD. MATERIALS and BUILD GUIDE-LINES:

This project evolved using common residential scrap building materials mostly sourced from a friendly local builder's yard. Some details changed during the build - details shown here indicate the final product. Feel free to change or substitute any details/materials as you see fit.

Basic specs for this prototype were:

Fuselage: 20" long, square cut at each end - cut from scrap 8" dia plastic drainage pipe.
Wing: 28" span x 9" chord cut from one piece 1/2" marine plywood.
Stabiliser: 14" span x 6" chord cut from one piece 3/8" marine plywood.
Fin: 3/8" marine plywood - approx 9 1/2" h x 7 1/2" wide.
Cowling: original intention was to make a simple fibre-glass cowling over a foam plug, however, by chance I came across a old alloy pot in a local 'Op Shop' that proved ideal.

The cockpit canopy was cut from urethane foam, carved to shape, sanded and covered with stretchy nylon stocking material and then liberally coated with 2-pot epoxy. Sanded again and painted silver. The canopy framing lines were 1/8" wide striping tape - all painted with clear polyurethane after being glued in place.

The undercarriage legs were cut from a small scrap piece of 4" x 2" ali box section with 1/8" wall thickness. Wheels were " dia. plastic items ex an old baby stroller or similar.

The propeller was a redundant r/c item, 15" or 16" dia. Mounted using a 1/2" s.s. bolt and series of nuts, washers, and spacer. The prop rotated freely in the wind.

The mounting socket mounted between the undercarriage legs was custom-made at a local engineering shop. It was cold-galv painted and fitted between the undercarriage legs using four 3/16" gutter bolts. Drill through fuselage and wing from underside but fit bolts from inside.

The finished item was bolted to a length of suitable dia. gals. pipe approx 3ft long which was set in concrete in the in the desired location.

The main body items were hand-painted using 'Resene' (acrylic) test-pots. The cowling and cockpit canopy were spray-painted using cheap 'rattle cans'. The decals were hand-cut ex scrap stick-on vinyl sourced from a local signwriter shop.

In the cause of longevity it is important to use good quality marine plywood as opposed to cheaper construction plywood. All fixings were either stainless steel or galvanised metal.

My prototype caused much amusement in the neighbourhood and was in use at two residential properties over ten years. It was fully refurbished (repainted) after the first five years."

Supplementary file notes

Planfile includes build instructions.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

AT-6/Harvard Mailbox (oz13880) by Alan Wooster 2022 - model pic

Datafile:
  • (oz13880)
    AT-6/Harvard Mailbox
    by Alan Wooster
    June 2022 
    28in span
    Extra
    clean :)
    all formers complete :)
  • Submitted: 05/06/2022
    Filesize: 598KB
    Format: • PDFbitmap
    Credit*: AlanWooster

AT-6/Harvard Mailbox (oz13880) by Alan Wooster 2022 - pic 003.jpg
003.jpg
AT-6/Harvard Mailbox (oz13880) by Alan Wooster 2022 - pic 004.jpg
004.jpg
AT-6/Harvard Mailbox (oz13880) by Alan Wooster 2022 - pic 005.jpg
005.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Thanks for "Posting" this one (pun intended!!). This is a beauty and the basic design would be adaptable to other round engined aircraft too......definitely on the build list!!
Mark Stanley - 13/06/2022
The postman leads a hazardous life. Getting bitten by the dog became socially accepted in time; now propellers biting their fingers too seems a little too much, really.
Miguel - 13/06/2022
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.