Rhubarb (oz13832)

 

Rhubarb (oz13832) by Tim Rose 1991 - plan thumbnail

About this Plan

Rhubarb. Radio control sport model, for 1 cc engines.

Quote: "Rhubarb. Frustrated at the need to fly in small fields, Tim Rose took matters into his own hands and designed his own answer.

Luckier than most, I have the opportunity to fly my model aircraft whenever I want near our farm cottage. Unfortunately the field I'm allowed to fly in is far from suitable. It is fairly small, gently sloping and surrounded by menacing, plane-grabbing trees (my brothers glider has already been victimised by one such tree). Trying to fly your average sports plane around these obstacles, especially when coming into land, is a bit of a handful, so what I needed was a small, easy to fly and manoeuvrable model capable of flying from this site.

My first reaction was to sift through a pile of free plans I had collected over the past few years, to look for a suitable model but nothing really fitted my exact needs. After a lot of thought, the decision was made to design the Rhubarb. The advantages of small models have been well explained in columns like 'Weekend Pilot' and 'Engine Bay', but the question was how small to make it? I had a spare old PAW 80 (no throttle) out of a broken control line plane and also a set of Fleet Micro Radio gear extracted from a hand launch glider, so I thought I would design it around them.

Small models can often be twitchy and difficult to fly (ever seen Bob Ryan's micro fly? How does he do it!). The Rhubarb had to be stable and easy to fly so I employed large tail areas and moment arm into the design, using the theory of trainers. The rest of the plane is fairly standard.

Construction: The Rhubarb is very quick and easy to build and shouldn't present any problems to someone who has built a few models before. As with all models, especially small ones, try to keep Rhubarb as light as possible. Careful wood selection will help here as well as lightweight radio gear. I used cyanoacrylate glue for most of the construction, except in high stress areas such as the nose and wing joints where I used 5 minute epoxy. The ready to fly weight turned out at 15oz, but anything up to 20 oz will be OK.

Fuselage: The fuselage is made up of a simple box section. First of all, using medium grade balsa, cut out the two sides, wing doublers, formers, strengtheners and hatch supports. Make up F3 using 1/4 x 1/8 balsa. Then glue the wing doublers, hatch supports and strengtheners on to the fuselage sides making sure you have built a left and right hand side.

On to either side, glue the formers F1, F2 and F3 in their correct positions ensuring that they are at right angles to the sides. Use 5 minute epoxy for the plywood Fl. Once completed, attach the other side to these three formers and then glue on the 1/16 ply bulkhead facing.

The tailplane, fin, elevator and rudder can now be cut out of light 1/8" sheet balsa and made up. The 1/8 x 1/8 tips on the tailplane and fin have the grain running in the opposite direction. This stiffens them and also prevents them from warping..."

Rhubarb from R/C Model World, August 1991.

Direct submission to Outerzone.

Update 14/6/2022: Added CAD drawing (in SVG format), thanks to HJ van Tol.

Quote: "Dear Mary and Steve, This model I've put on my 'to do' list. It seems simple enough for me. But I noticed the resolution is a bit low. I set out to redraw some parts and I ended up with a new drawing. Along the way I filled in some gaps. You could consider offering this SVG-file to the modelling community so anyone can correct my mistakes. Thank you for your noble work. Greetings from the Netherlands,"

Supplementary file notes

Article pages, thanks to RFJ.

CAD file

This plan is available for download in CAD format.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Rhubarb (oz13832) by Tim Rose 1991 - model pic

Datafile:
  • (oz13832)
    Rhubarb
    by Tim Rose
    from RC Model World
    August 1991 
    32in span
    IC R/C
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 21/04/2022
    Filesize: 458KB
    Format: • PDFbitmap • CADfile
    Credit*: Circlip, RFJ, HJvanTol

Rhubarb (oz13832) by Tim Rose 1991 - pic 003.jpg
003.jpg
Rhubarb (oz13832) by Tim Rose 1991 - pic 004.jpg
004.jpg
Rhubarb (oz13832) by Tim Rose 1991 - pic 005.jpg
005.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Thank you.
Joe Melton - 07/06/2022
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.