Super Fli (oz13817)


Super Fli (oz13817) by Keith Humber 2003 - plan thumbnail

About this Plan

Super Fli. Radio control scale model. For OS 25 FP engine.

Quote: "Super Fli, by Keith Humber. A 44 in span version of this sporty little home-build by Phil Kraft for .25 power and 4 function R/C.

The Super-Fli was designed in the early seventies by Phil Kraft. He won the R/C World Acrobatic championships in 1967 with his famous Kwik Fli (oz6526) design, and represented the USA no less than three times in this event, but only won once. With a background like this he would have certainly known how to design an aerobatic model or full-size machine - hence the origination of the full-size Super-Fli. Construction of the aircraft was under-taken by Paul White, an employee of Phil's and took the 'Best In Class' award at the 1975 Oshkosh fly-in.

The Super-Fli design is virtually a large model with most of the Kwik-Fli features, i.e. thick symmetrical wing sections, flat plate tail and fin with large rudder and long moments, in fact everything a good R/C acrobatic scale model would be. Phil's Super-Fli model was (yes it is now defunct) powered by an OS 45FSR, spanned 58 in and was quite a flier. This leads me on to my version of the Super-Fli.

Looking for a replacement for my old Wight Wizard (oz11820), which is starting to show signs of wear (well it is about ten years old), I needed a .25 sized model for this winter. I had looked at the Super-Fli for quite a while as a highly suitable project. I can't really match Phil Kraft for design and flying, but at least I could try my best at a sort of tribute to the master. Well the model has turned out very well, flies good and the manoeuvres are clean and the model has few vices with a good landing approach - just as I had envisaged.

Start with the Fuselage: Construction-wise the model is very easy. The fuselage has 3/32 sheet basic sides doubled with 1/16 ply from the front back to the cockpit. The formers are a mix of 1/8 ply for F1, F2, F3 and F4 is a 1/16 balsa sandwich. F5 and F6 are 1/8 balsa with F7 1/8 ply.

The plan is drawn for an OS25FP. The engine bearers are 1/2 x 3/8 beech, set diagonally to enable the silencer to sit in an opening on the underside of the cowl. The fuselage top and bottom are sheeted with flexi-ble 3/32 balsa (an option would be to plank it), although my model sheeted fairly easily.

The engine bay is different inasmuch as the top fuselage sheeting goes over right to the 1/8 ply C1 with a 3/8 balsa cowl front. The lower cowl sides are lithoplate bent at the top to form a rebated tongue which fits under the top cowling and spruce stiffener 1/4 x 1/8. The cowl is fixed at the bottom with two screws (either side) into the C2 member (this is 3/8 balsa faced with 1/8 spruce to enable the screws to hold).

The fuel tank is a 4 oz square MFA type which sits through F2.

The cooling-air exhausts through the rear underside and by the silencer to hopefully cool the OS .25.

Wire Undercarriage Construction: The undercarriage is the hardest bit of the model, ie it uses 10 swg piano wire All the joints are bound with 5A fuse-wire and soldered. There are two pieces of 16 swg bound and soldered at the bottom 'V' to carry and fix the spats and a pair of 16 swg linking wires at the top to position the main undercarriage mem-bers into the hardwood beech undercar-riage mountings in the wing.

The front 10 swg legs are bent to fork either side of the fuselage, i.e. no fixing to the fuselage at all. The triangle is filed in with 1/8 balsa epoxied into position and covered with Profilm. This all becomes self-explanatory when viewing the plan..."

Super Fli from R/C Model World, July 2003.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Super Fli (oz13817) by Keith Humber 2003 - model pic

  • (oz13817)
    Super Fli
    by Keith Humber
    from RC Model World
    July 2003 
    44in span
    Scale IC R/C LowWing Civil
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 21/02/2022
    Filesize: 746KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

  • Kraft_Super_Fli | help
    see Wikipedia | search Outerzone

    ScaleType: This (oz13817) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.

    ScaleType is formed from the last part of the Wikipedia page address, which here is
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email

User comments

Keith's Wight Wizard (mentioned in text) is in the OuterZone collection (oz11820)
Marty Hillier - 12/05/2022
Got it, added a link to that plan page now. Many thanks.
SteveWMD - 12/05/2022
Add a comment



Download File(s):


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.