Sierra (oz13793)

 

Sierra (oz13793) by David Ribbe from Top Flite - plan thumbnail

About this Plan

Sierra. Radio control sport trainer model. Wingspan 60 in, wing area 660 sq in, for .28 - .46 2-stroke or .40 - .60 4-stroke engines.

Quote: "The Top Flite Sierra is an excellent trainer model designed to get you off to a great start in learning to build and fly. After you learn to fly, the Sierra also has enough maneuverability to perform most basic aerobatics and provide many hours flying enjoyment. The easy construction, great lines, and included decals make it easy for you to build a great-looking model.

The Top Flite Sierra is designed to fly as good as it looks. Its thick, flat-bottom wing offers strong lift at slow speeds and great strength. The computerdesigned, interlocking structure allows you to build a straight and true model with smooth confidenceboosting flight qualities.

Engine and Mount: The recommended engine size range is as follows:

.28-.40-.46 cu in 2-cycle
.40-.48-.60 cu in 4-cycle

Note: The displacement in bold type is the most highly recommended. However, all of these engines will fly the Sierra well. The supplied MM40 motor mount should hold most of the two strokes in the range and some of the four strokes. It is permissible to file the inside of the mount slightly to fit larger engines (see photo on page 28). Some engines may require you to buy a different mount from your hobby dealer. Study the plans and the engine mounting section of this bookformore information and sample installations.

Bolt-on or Rubber Band-on Wings: The Sierra has been designed and tested with rubber band-on or bolt-on wings. The rubber band on wings will better absorb the shocks of a crash or landing accident such as a cartwheel. If you have a good instructor and flying site or already have some flying experience, you may want to use the bolt-on wing option.

3 or 4 Channels: The Sierra flies very well with or without ailerons. The 3-channel version will be cheaper and easierto build. The 4-channel version offers the extra flexibility of aileron control. Ailerons make cross wind take offs and landings easier to control, so many instructors recommend ailerons.

Tricycle or Taildragger Gear: The tricycle landing gear is considered standard. We recommend the tricycle gear if this is your first airplane because it offers the best ground handling as well as straight ahead take offs and landings. The tricycle gear also does a better job of protecting the propeller during bouncy take offs and landings. If you are sport flying the Sierra or want to learn to fly a taildragger, provisions have been made to allow you to build the Sierra as a taildragger. The Great Planes #L-7 tail wheel assembly may be purchased from your dealer and modified slightly to match the drawing on the fuselage plans..."

Direct submission to Outerzone.

Supplementary file notes

Manual. 44 pages.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Sierra (oz13793) by David Ribbe from Top Flite - model pic

Datafile:
  • (oz13793)
    Sierra
    by David Ribbe
    from Top Flite
    60in span
    IC R/C Cabin Kit
    clean :)
    formers unchecked
  • Submitted: 05/04/2022
    Filesize: 1362KB
    Format: • PDFbitmap
    Credit*: JJ

Sierra (oz13793) by David Ribbe from Top Flite - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.