U-2 (oz13651)


U-2 (oz13651) by Anthony Eimen 2021 - plan thumbnail

About this Plan

U-2 Profile prop-jet. Radio control semi-profile scale model, for electric power. Pusher prop layout. Wingspan 45 in, wing area 190 sq in.

Quote: "U2A Profile Prop Jet. Designed by Anthony Eimen (in collaboration with Pat Tritle)."

See prototype build thread on RCGroups by builderdude at: https://www.rcgroups.com/forums/showthread.php?3795... for more details and lots of good pics.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

U-2 (oz13651) by Anthony Eimen 2021 - model pic


  • Lockheed_U-2 | help
    see Wikipedia | search Outerzone

    ScaleType: This (oz13651) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.

    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Lockheed_U-2
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

I am the designer of this airplane. And although I didn't personally authorize publishing it here, I am in support of that as I do want to share this design for free. My only concern is that this is a preliminary design plan, and the U2 has not yet flown. I would like to caution that ribs should be cut slightly long and not notched until it's test-fitted over the spars for notch accuracy. Do that and you should be fine, building this.
The completed weight of mine was 11.3 oz, with battery on-board, ready for flight. Mine uses a 2 cell, 7.4V 500 mAh Lipo in the nose with a little nose ballast.
Anthony Eimen - 02/03/2022
Add a comment



Download File(s):


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.