Brainbuster A-6 (oz13645)
About this Plan
Brainbuster A-6. Indoor rubber model.
Direct submission to Outerzone.
Quote: "Greetings, Please accept this plan for an indoor rubber A-6 plane designed by AMA Hall of Fame Member and longtime Brainbuster FF Club member Abram Van Dover. Thank you, Dave Beazley, AMA 2817"
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz13645)
Brainbuster A-6
by Abram Van Dover
2015
13in span
Rubber F/F
clean :)
all formers complete :)
-
Submitted: 21/02/2022
Filesize: 20KB
Format: • PDFbitmap
Credit*: DaveBeazley
Downloads: 517
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Yes! I built this A6 some years ago! I still fly it regularly! Met Abram back in 2013 at Nats. What a cool Guy!Jeff Renz - 25/02/2022
Hello, here are a few photos of this indoor model I built from this plan [main pic, 003-006]. The plan notes that the elevators have a tip dihedral of 1 1/16”, which I changed to a 90° angle, for twin rudder. The build took about a day and a half, and was relatively simple. I built a more effective propeller from 1/32” balsa sanded to 1/64”. I used a 8” long loop of 1/16” FAI rubber. The model was easy to trim but had to be repaired a couple of times. All wing and tail surfaces were made up of 1/16” x 1/32”, and 1/32” sq. balsa strips. It weighs 2 grams without rubber. I made the wings extra lightweight so they could warp (note them warping down in the photos attached).
Gage Van Vranken - 05/09/2023
Add a comment
- Brainbuster A-6 (oz13645)
- Plan File Filesize: 20KB Filename: Brainbuster_A6_oz13645.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.