Vectra (oz13518)


Vectra (oz13518) by Philip Clark 1993 - plan thumbnail

About this Plan

Vectra. Radio control sport model for .40 engine.

Quote: "Faced with a GCSE Design Technology assignment, Philip Clark turned to his hobby of aeromodelling to look for a suitable subject. The answer to his problem arrived in the shape of [Vectra', a 45 inch span sports model for .40 size engines and four function radio. Philip extended his design three times, improving the model each time and there are still possibilities for those who would like a good, well tried model to experiment further with.

At the time that I first thought of Vectra, I had being flying RC model aircraft for just over four years. I had been introduced to the hobby by one of my friends, and it was not long before I was keen to build and fly a model of my own design.

My first model was a Tyro Major (oz10859) which proved to be a rugged and successful training aircraft. Having mastered the basic skills of flying I progressed on to fly a Galaxy Models Gazelle. With this model I was able to learn and master the basic aerobatic manoeuvres, but then found that the model had its limitations. It became clear that if I was going to improve my skills further I would need a more advanced model.

On a visit to Cranfield I saw Barry Lever demonstrating his Warrior 40 and I decided that this was the way forward for me. The model was duly completed with an Enya 45 installed. It proved to be a very stable and manoeuverable aircraft to fly - an ideal first low wing model. Having become accustomed to flying the Warrior, I decided that a little more power would be useful if I was going to widen my range of flying skills. Having looked at other engines I decided the cheapest and quickest way to gain more power was to fit a tuned pipe to my existing engine. Performance was certainly improved and I continued to fly the Warrior successfully for some time.

The next development came when one or two pylon racing machines appeared at my club's flying site. At the same time I was due to begin a GCSE course in CDT Design Technology at Comberton Village College, Cambridge. By this time I felt I had learned enough about aircraft design and construction to attempt to design and build my own model. I decided to research the Sport 40 aspect of R/C modelling and I spent some time reading about and investigating the subect. I was eventually able to develop a specification which I felt would suit my needs. I then began to draw some design ideas of my own, and after considerable thought and development I was able to produce working drawings of my final design.

The construction of the model is straight forward to anyone with some modelling experience.

Manufacturing Plan: Details of materials used appear on the full size plans.

Wing Construction: Mark out all ribs Carefully cut out all ribs. Add 1/16 ply doublers as shown on the plan. Jig up one wing panel with top and bottom main spars. The bottom spar should be packed up at the tip to allow for a taper in wing thickness. Add leading and tailing edges and sub spars. A staight edge should be placed across the top edges of the spars to ensure correct alignment. Web all spars. Remove from the building board and lightly sand where needed..."

Vectra, R/C Model World, August 1993.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Vectra (oz13518) by Philip Clark 1993 - model pic

  • (oz13518)
    by Philip Clark
    from RC Model World
    August 1993 
    45in span
    IC R/C LowWing
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 20/10/2021
    Filesize: 676KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

Vectra (oz13518) by Philip Clark 1993 - pic 003.jpg

Do you have a photo you'd like to submit for this page? Then email

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment



Download File(s):


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.