Apache (oz13451)
About this Plan
Aerocraft Apache. Radio control sport aerobatic model for 05 electric motor (or .09 - .15 glow engine). Wingspan 44 in, wing area 340 sq in. Target AUW is 38 oz.
Direct submission to Outerzone. Cleanup by Pilgrim.
Note the supplement instructions file includes 2 pages of parts identification drawings, these show all wing ribs and formers, at reduced scale [edit: fixed now, see printwood supplement].
Note there is a 1997 review of this kit by Ron Farkas online at RCGroups see: https://www.rcgroups.com/forums/showthread.php?194487-The-Aerocraft-Apache
Quote: "The kit consists of die-cut ribs and fuselage sides, sheet and strip balsa, some plywood parts and vacuum formed plastic cowl and canopy. Wood quality was good, but a few of the die-cut ribs required the stroke of a hobby knife to release from their sheets. Formed landing gear wire, aileron torque rods, hardwood mounting blocks and an ample supply of assorted hardware items are supplied.
There are clearly drawn and accurate rolled plans and a well-organized 12 page instruction booklet. This booklet includes an itemized parts list and diagrams of the die cut sheets to assist in locating parts, although some of the diagrams have been accidentally printed as reverse images. There are no assembly photos or drawings, but that is a minor issue since the construction is quite conventional.
Considering the importance of weight savings in electric powered models, Aerocraft's choice of wood density and quality was quite good. I think their target weight of 38 oz is unrealistically low, but the model has proven to be flightworthy at 50. The long tail moment can make this model susceptible to tail heaviness. Even though I added an optional steerable tail wheel, my Apache still balanced properly by mounting all of the radio equipment as far forward as possible and stuffing a 500 mah pack behind the firewall.
The instructions and plans could be improved by being more explicit about equipment location for those builders who don't plan ahead on their own.
Construction: Although this is a entirely built-up airframe, it assembles rapidly because almost every part fits perfectly. The bottom of the tapered wing is flat behind the main spar, and thus is to be built directly on the plans. The main spars are first made from laminations of 1/16 x 1/4 and 1/8 x 1/4 balsa strip stock. This yields 3/16 x 1/4 spars that are stronger than a single piece of stripwood.
The bottom main spar is laid on the plan, followed by sheet trailing edge stock, a pre-tapered trailing edge spar, most of the ribs, shear webs, the top spar, and a 3/16 sq leading edge spar. Trimming the shear webs to fit between the top and bottom spars was a little more time consuming than just gluing them to the back of the spars..."
Update 21/9/2024: Added printwood zipfile, thanks to theshadow.
Supplementary file notes
Instructions.
Printwood zipfile.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
No comments yet for this plan. Got something to say about this one?Add a comment
- Apache (oz13451)
- Plan File Filesize: 773KB Filename: Apache_oz13451.pdf
- Supplement Filesize: 2226KB Filename: Apache_oz13451_instructions.pdf
- Supplement Filesize: 1051KB Filename: Apache_oz13451_printwood.zip
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.