Henschel SR (oz13407)

 

Henschel SR (oz13407) by Stan March from Aeromodeller 1940 - plan thumbnail

About this Plan

Henschel SR. Rubber scale model German observation plane.

Direct submission to Outerzone.

Quote: "Build the Henschel SR. Design by Stan D March.

THE new German Air Force is composed of some of the finest planes in the world. Right from the four-motor bombers down to the light trainers, Teutonic thoroughness is depicted.

The Henschel Short Reconnaissance plane is used extensively by the Luftwaffe, as the German Air Force is called. It is built by the Henschel Company at their new plant, situated in a little village called Schonfeld, on the outskirts of Berlin, and is typical of the observation class, as we should term it, the high-wing arrangement offering excellent visibility.

The ship is powered by a BMW Hornet and carries amongst its very complete equipment a two-way radio. It is a two-place job, having a gunner-observer in the back pit.

The German war-time ships have been great favourites with modellers, and if you have been keen on Fokker and Albatross ships, then here is what you have been looking for - a combination of the Black Cross and a modern 'plane, as well as a worthy addition to your collection, so let's get on with the model.

Start first on the fuselage with the jig stringers or master stringers. After joining the two plates of the fuselage together, slip a sheet of carbon paper underneath and transfer the outline of the jig stringers on to medium 1/16 sheet, running, of course, with the grain. After cutting out the jig stringers, take the formers; the first three are from 1/16 sheet, for strength, and the next from 1/32 sheet. Mark the position of the 1/16 square stringers, but leave the actual cutting until the fuselage is lined up, then mark the position of the formers from the plan on to the jig stringers, and cement in position.

Next comes the 1/32 sheet stiffening for the cabane struts and the landing gear; this will have to be put on in two sections, owing to the curvature of the fuselage; make the joint of the two sections on former D. A better finish can be obtained if the two-place cockpit is cut out after the sheet is cemented in place..."

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Henschel SR (oz13407) by Stan March from Aeromodeller 1940 - model pic

Datafile:
  • (oz13407)
    Henschel SR
    by Stan March
    from Aeromodeller
    July 1940 
    18in span
    Scale Rubber F/F Parasol Military
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 21/10/2021
    Filesize: 664KB
    Format: • PDFbitmap
    Credit*: hjsaxe

ScaleType:
  • Henschel_Hs_122 | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz13407) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Henschel_Hs_122
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Henschel SR (oz13407) by Stan March from Aeromodeller 1940 - pic 003.jpg
003.jpg
Henschel SR (oz13407) by Stan March from Aeromodeller 1940 - pic 004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

In fact, the real thing was called Henschel Hs 122. Not too many were built, but it lead to the far more successful and larger Hs 126 which had a significant military career. And the Hs 122 definitely was a pretty aircraft.
Martin - 31/10/2021
I did scratch my head as to why the RLM would use 'SR' (Short Reconnaissance) and not 'KA' (Kurze Aufklärung) which means the same thing), so I did a bit of digging around. It's a Hs 122B-o (pre-production deignation) which was only the second aircraft that was made by Henschel) and only served in limited numbers
Daithi - 31/10/2021
What incredible timing that the article admiring the technical prowess of the Luftwaffe would be published in the same month as the start of the Battle of Britain!
TimE - 31/10/2021
Daithi, give the author a break, that was 1940, this was a rare bird (seltener Vogel), Bill Gunston would be 13 at the time so a bit early to accurately label the thing! Count yourself lucky Stan March was able to name this as a Henschel product, as this firm was known for their locomotives, trucks, road building equipment, tanks, pianos both grand and unimposing too, oh, and airplanes as well.
I remember seeing a grader of theirs recently, beautifully preserved, but couldn't stop for photos :-(
Miguel - 31/10/2021
Aha, have changed the scaletype now to Hs 122.
SteveWMD - 01/11/2021
Always remember that air intelligence still had a long way to go in these days. AFAIK the UK was completely caught off guard when the first Focke-Wulf 190 entered service.- In spite of having been test flown in the last months before the outbreak off WW.2 quite visibly and thoroughly from Hamburg-Finkenwerder airport.
Martin - 02/11/2021
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.