Mini Rebel (oz13280)

 

Mini Rebel (oz13280) by Jim Zare 2001 - plan thumbnail

About this Plan

Mini Rebel. Radio control sport model for electric power. Geared can motor shown.

The original Live Wire Rebel (oz5553) was a single channel design by Hal DeBolt, kitted by DMECO in 1955. This here is a later version, redesigned for electric power.

Quote: "You mentioned your desire to build a smaller version of the Rebel. In 2001 I created a 2/3 version with a span of 32 in. I will attach a full size pdf of that plan called a Mini Rebel.

It was built and flown with a MTM (Mikes Tiny Models from Germany) Hummingbird motor and Tadiran lipos from Israel. The Tadirans were the first Lipos I ever used. Note this is the era before brushless outrunners.

The model was designed for golf domes, backyards and parks. It weighed about 7.5 ounces with this equipment and the RC gear of the time. It was a bit underpowered as I recall. I later added a nose block and flew it with an Astro 010 brushless motor. It flew well but was a bit fast for indoor flying.

A couple of years ago I cut off the Astro 010 nose block and mounted and Eflite Park 250 in the Mini Rebel. I fly it with a 2S 250 pack. It weighs 6.75 ounces with a wing loading of a mere 5 ounces per square foot. I hadn’t flown it for over a year. Yesterday I took it to a local park for a few flights. I did install a magnetic hatch at the bottom front for battery exchange. It is a piece of 1/64 ply.

It flies similarly to the original size Rebel. It gets buffeted a little more in the wind, but all in all it is a nice sport model. It will easily ROG from pavement or picnic tables. It loops repeatedly without any problem but since I used the original rudder configuration rudder rolls are more difficult. If I built one again it would enlarge the rudder area. Flight times are about 7 minutes with the 250 pack. It will also take a 450 pack. I’ll try one on the next outing.

The parts are laid out by size on the plan. It should be easy to bandsaw parts and scratch build. Some people have been able to laser cut from PDFs. I am not sure what is involved.

I took the photos of the Rebel 2021 (oz13263), the Debolt Yankee and the Mini Rebel together [see pics 003, 004], to illustrate their size difference."

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Mini Rebel (oz13280) by Jim Zare 2001 - model pic

Datafile:

Mini Rebel (oz13280) by Jim Zare 2001 - pic 003.jpg
003.jpg
Mini Rebel (oz13280) by Jim Zare 2001 - pic 004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.