Rebel 2021 (oz13263)
About this Plan
Rebel 2021. Radio control sport model for electric power. Wingspan 47 in, wing area 417 sq in, for 2217-20 brushless motor.
The original Live Wire Rebel (oz5553) was a single channel design by Hal DeBolt, kitted by DMECO in 1955. This here is a later version, redesigned for electric power.
Direct submission to Outerzone.
Quote: "I just finished a redesign and build of the Debolt Rebel for contemporary electric power. There is a write up in RC Groups vintage category, see https://www.rcgroups.com/forums/showthread.php?395... for more details. Jim Zare."
Quote: "I have been a fan of Debolt Model Engineering kits since I got into RC in 1969. I bought a second hand Rebel with an OS Max 10 in 1970. I flew the heck out of it until I folded the wings in a power dive and loop. It was a fun flyer!
In 2002 I created an AutoCAD drawing for an electric powered Debolt Rebel using a Graupner Geared Speed 480 motor with Nicads. Bob Holman cut several sets of laser parts for this version which were built by friends. I bult one and flew it for several years until it was damaged in a crosswind landing.
While cleaning the hobby room I recently found a set of Rebel parts in a drawer and decided to build a version with contemporary brushless power, Lipos and a modern radio.
I had to touch up the 2002 plan and the result is the Rebel 2021 presented here. It is pretty close to the original 1956 Rebel with these modifications:
1. Planned for a Innova8tive Systems 2017-20 motor with a 3S 1800 or 2200 mah Lipo pack and a 20 AMP ESC. This will provide 150- 170 watts depending on prop selection.
2. Changed the center section of the wing to a flat section for easier alignment of a wing hold down dowel. This resulted in slightly less wing span and area.
3. The spar is laminated with balsa and spruce for strength.
4. Created a bottom magnetic hatch for battery insertion
5. Used piano wire landing gear instead of aluminum.
6. Landing gear was designed longer than the original for easier grass take offs.
7. Made the fuselage narrower.
8. Eliminated the bottom floor of the cabin.
9. Enlarged the rudder to make rudder rolls easier.
I was able to use most of the parts from 2002. It used the original Debolt airfoils and moments. I had to cut a new former for the motor mount and the hatch components..."
Note see see Jim's build thread on RCGroups at https://www.rcgroups.com/forums/showthread.php?395... for more details, some great pics, and a flight report.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2021.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.