Orca (oz13167)

 

Orca (oz13167) by Larry Sicuranza from Model Builder 1976 - plan thumbnail

About this Plan

Orca. FAI power model.

Quote: "This is not just a construction article. The author takes us on a complete tour of the FAI Power picture, and invites you into it. The tour is very well guided .. and the model's good too! Orca FAI Power, by Larry Sicuranza.

Swift and graceful, Orca moves with effortless power through its three-dimensional realm. Whether rocketing up in pursuit or drifting under the sun, its black and white beauty dominates the eye with sheer majesty.

The above describes the real animal, which I first saw at Marineworld. I was so impressed by this marvelous creature that no other name would do for my new FAI ship. It was already black and white for air and ground visibility and had a pylon shape similar to Orca's dorsal fin.

Unlike the real Orca, known to those who know nothing about him as the Killer Whale, the balsa bird has evolved through only six Marks in three years. This article describes the current version and ignores the others, as everything learned from them is used in Mk 6.

If you've read this far, it's because the photos attracted you, or you're already a FAlnatic, or you are thinking about maybe trying FAI Power. If the latter is the case, the only advice I can give you is do it! Try FAI. I got into it three years ago after reading the Zingo article in FM. I only wish it had appeared ten years ago! Up 'til then I'd thought that Power was too expensive, too difficult, too this or too that. Fish feathers! It's nothing of the kind. One thing it is, is demanding. None of the instant success or gratification so eagerly sought in our hollow society. You don't buy the pieces, assemble it and win your first contest. The planes are not easy to build - half-baked methods will not do the job. So if you aren't ready to earn the rewards with care and attention to detail, maybe FAI is too-too for you. Of course, any event can be equally demanding, if you intend to win.

This is exactly the point of this semi-sermon. If you are, or want to be, successful in AMA events, you can shut 'em down in FAI too!

I will now proceed to tell you how. Build an Orca. But first, a few hundred words on the stuff it uses. These come first because they affect construction.

ENGINES: There are no less than nine engines to choose from, ranging in price and availability from great to miserable (The new Cox .15, due to be released at any moment, makes it ten. wcn). The Rossi has been boss since it appeared and is my first choice (as of the moment) for performance and handling. I quite often hand-start it, and it never acts up. Availability is improving, thank goodness.

If you can't go the $75 for a Rossi, look at the Kosmic and the Taipan. Both are less expensive, easier to find, and both are good enough to win. They'll turn over 22 grand stock. A new entry is HGK but I haven't seen one run yet. Engines in the works are the OPS, the new KB, Cox, and the STX.

Two mills readily available but not competitive in stock form are the ST and KBS. However, you can send them to Ron Sheldon (the Pylon guy) and have him give them the treatment he gave mine. The KB is now turning near 22, and the ST is over that on the ground. Ron's address, and others, are at the end of this mess.

To make a long story short, there is an engine you can afford and get hold of, that is competitive. And remember that consistency is more important than top revs - every time.

MOUNTS: The engine you settle on will deter-mine the mount you use. There are five to choose from this time. For the Rossi, ST and Taipan, there are pans by Ken Oliver, Guy Shaw and ST. I like the streamlined circular section of the Oliver, but you might like the extra room behind the engine available in the Shaw mount. The ST is similar to the Oliver, but lighter and, in my opinion, more fragile. They all cost within pennies. of each other, but the ST is a little harder to find.

The other pan mount is by Tatone. It's the cheapest to buy, but often needs work to dress the mounting surfaces and clear the engine. For the Kosmic and KBS engines, the best mount is not a pan, but a machined forging by CB. It's big, heavy and nearly indestructable. I believe it was designed for QM Pylon racing, and provides the solidest mount of all. Also the least expensive. If the CB or Shaw mount are to be used, you'll have to deepen the nose of Orca to match. About an 1/8 inch or so.

TIMERS The choice of timer is improving, too, with Seelig and Monks foremost for automatic airplanes, and Tatone and KSB for conventional. I've built a couple in according with Bill Hunter's article in MB (March '75) and really like them. Took about fifteen minutes to make a flood-off for my A ship. Cost under $5 to boot... "

Orca, Model Builder, March 1976

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Orca (oz13167) by Larry Sicuranza from Model Builder 1976 - model pic

Datafile:
  • (oz13167)
    Orca
    by Larry Sicuranza
    from Model Builder
    March 1976 
    61in span
    IC F/F
    all formers complete :)
    got article :)
  • Submitted: 05/04/2021
    Filesize: 221KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

Orca (oz13167) by Larry Sicuranza from Model Builder 1976 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.