Jumbo (oz13138)

 

Jumbo (oz13138) by Dick Mathis from American Aircraft Modeler 1968 - plan thumbnail

About this Plan

Jumbo. Simple profile scale airliner model, for Jetex power.

Quote: "Designed for quick-building, kids, and school-yard flying, a Jetex-powered model of the 500 - airliner of the 1970's. Jumbo, by Dick Mathis.

THE 'Jumbo' is a model of the Lockheed-500, the civilian counterpart to the C-58 cargo ship now being built for the military. The 500, along with the Boeing 747, will be the first of the giant Jumbo airliners of the 1970's. They will be the largest airplanes in the world, capable of carrying over 500 passengers.

You can build our rocket-powered Jumbo, buy motor and fuel, for less than $2.50. The rocket motor (Jetex 'Hellcat,' available at most hobby shops for $1) uses solid fuel pellets which will cost 10c per flight, and are very safe. No special skills or tools are needed to operate the Jetex, since it has nothing to adjust, and is ignited with a simple fuse. It never wears out, and, most important, it sounds and performs like the real thing! All you do is load it, which takes only a minute or two. It gives about 3/4 oz of thrust for 15 seconds, which is ample enough to carry the Jumbo over 50 feet high, before it starts its glide.

The Jumbo is all sheet balsa, so you just cut the parts out and glue them together. No paper covering, or painting is necessary, and markings like the cockpit, windows, and elevator outlines are made with a ball-point pen. If you make good strong glue joints, the ship will be practically indestructible.

To begin yours, go to the hobby shop and purchase one sheet of 1/16 x 3 x 36 in, and one sheet of 1/8 x 3 x 36 in balsa wood, plus a small tube a cement (not plastic cement). You will also need a few straight pins, a straight ruler, and a sharp modeling knife, and of course, the Jetex motor and fuel. All of the necessary wicks and gaskets are supplied with the fuel.

Study the plans, which are shown fullsize so you can take the outlines of all the parts directly from them. Do this by placing the piece of balsa underneath the plans. and making pin holes through the plans and into the wood along the outline shown. Then the pin holes will give a good guide for cutting the actual part out accurately. It also helps to guide your knife with a straight edged ruler to make clean cuts. After cutting out all the parts, you should make whatever marking you want with the ball-point pen. A straight edged ruler will make it look neater.

Before assembling the plane. sand all parts smooth with fine sandpaper. Then, using the ball-point pen, mark the balsa for the outlines of the control surfaces, name, and other decorative details.

Over a sheet of wax paper, join the wing halves. One half is pinned down to the building board and the other is jacked up at a slight angle so that its tip is one inch above the surface of the board..."

Direct submission to Outerzone.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Jumbo (oz13138) by Dick Mathis from American Aircraft Modeler 1968 - model pic

Datafile:

ScaleType:
  • Lockheed_C-5_Galaxy | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz13138) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Lockheed_C-5_Galaxy
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.