Tichy Stik (oz13091)
About this Plan
Tichy Stik. Radio control sport model, for Cox TD .010 engine.
Note the plan shows 18 in wing for outdoors, with alternate 24 in wing for indoors with thicker airfoil.
Direct submission to Outerzone.
Note this is a low res scan, greyscale. If anyone can at some point submit a higher res scan, we'll replace this with a 2-colour version at say 400 dpi.
Update 10/06/2021: Added article, thanks to RFJ.
Quote: "Raid your scrap box and build your very own Tichy Stik.
I first saw a Cox .010 engine in an American department store some thirty years ago selling for around £4. Even though I wasn't into modelling at that time, I couldn't resist buying it to see if it was real or just a fancy tie pin!
Later, when indoor flying started at the ME Exhibition, I remembered that beautiful little red and black engine hidden away somewhere and started planning a simple, quick to build radio controlled model for it.
It obviously had to be very light, robust enough to withstand hard impacts and to use readily available radio gear. My son had a spare Hitec GEM two channel receiver in a buggy and two Hitec HS80 micro-servos with a 50 mAh nicad, all weighing in at 2-3/4 oz so the plane could weigh 3 oz or so to have a reasonable wing loading.
I like the twin boom stick style of construction, so I designed the minimum size around the main compnents with the servos exposed under the fuselage and with linen thread closed loops controlling the rudder and elevator. The wing is 18 x 4 in sixteenth balsa simply curved around the ribs and then split and re-glued to give plenty of dihedral. It all seemed very small, so TICHY STIK was born.
Flying first: Normally you expect the flying report to be at the end of the article but this time it is in the middle, so I can explain why it has an alternate wing!
I didn't really know what to expect with such a small model in breezy conditions, however after a gentle hand launch it climbed away briskly and proved to be very responsive. In fact, I wondered if it should be re-named Twitchy Stik! I soon realised that such a small model with very little inertia is very susceptible to the smallest of wind gusts and it really was relatively very stable and fun to fly.
It's surprisingly quick though, perhaps too much so for indoors. So I made a 24 in span wing with a thicker section, plus additional lightening holes, and planned on reversing the propeller to reduce the speed. This works well outdoors in calm conditions with the normal prop position.
On the board: Building is easy. Cut the two fuselage sides out of 1/32 ply and glue the booms on with 1/8 balsa quadrant around the edges. Don't forget to make the sides handed and the right side 1/16" shorter to glue in a little side thrust.
The wing is the quickest one I have ever made. Position two 1/4 in square strips on your building board to give the airfoil curve then gently steam the 1/16 sheet into a bend before pinning down and fixing the ribs with cyano.
Use a 2.5 mm jack plug with a switched socket for the radio charger/switch. Linen thread is used for the closed loop controls, fastened with a short length of heat shrink tubing and fixed with a drop of cyano.
Always think weight - the lighter the better and the easier it will bounce on landing. Tichy Stik is fun to fly, creates a lot of interest and you don't really need a 'BEE' certificate to fly such a small 'buzzy' model!"
Supplementary file notes
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2021.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.