Flinger (oz12995)


Flinger (oz12995) by Larry Jolly 1984 - plan thumbnail

About this Plan

Flinger. Radio control hand launch glider.

Direct submission to Outerzone.

Quote: "Here’s another glider plan (HLG) for Outerzone. It is the Larry Jolly Flinger HLG. At a 57 inch span it is in the 1.5 meter A class of gliders. With 300 sq. in of wing area, an estimated weight of 13 ounces and with an Eppler 205 airfoil it should produce an excellent performance glider. I’m sure modern radio equipment could cut a couple of ounces off the weight. A review of the Flinger is available here https://rclibrary.co.uk/title_details.asp?ID=2292.

I’ll be building this one first as stock to fly in the SLNT (Soaring League of North Texas) Class A Man on Man scramble. We use a 50 meter high start for this event, 25 feet of yellow Theraband tubing, a streamer or small parachute and enough line to make it overall 50 meters (164 feet). One helpful trick to get a little extra altitude is to 'Ping' the model off the high start; just as it nears the top of the climb push the model down to gain speed and then pull up to 'Ping' it off the line. Push the nose over as it climbs and level off at full height and you will get 20 to 30 extra feet on the launch.

Later I’ll build a second model using a Graupner 400 11.1v brushless and a Graupner 6 x 3 folding prop. The motors are pretty rare these days in the US but you may find them in Europe more commonly. Both of the models will include an adjustable tow hook. I’ve also tried the Hobby King B20-40-28L 2030Kv brushless with the Graupner prop (6x3) and it works quite well. I run it on a 3S lipo and get about 100 watts of power for most of the run. It hauls my 13 ounce Kastaway to 400’ in about 15 seconds or less.
Best wishes to all,"

Supplementary file notes

Ribs scan.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Flinger (oz12995) by Larry Jolly 1984 - model pic

  • (oz12995)
    by Larry Jolly
    from Model Builder (ref:9842)
    September 1984 
    57in span
    Glider R/C
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 28/12/2018
    Filesize: 482KB
    Format: • PDFbitmap
    Credit*: JohnYoung

Flinger (oz12995) by Larry Jolly 1984 - pic 003.jpg
Flinger (oz12995) by Larry Jolly 1984 - pic 004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Good morning Mary and Steve. I always start my day by going to OuterZone to see what treasures you have found to share with the rest of us. Today I woke to find a young me looking at old me!
About the Flinger it is a great all rounder well worth the small build time involved but will give that investment back in the form of hours of satisfaction. My usual recommendations are in order. Lengthen the nose an inch and narrow up the formers to appropriately house your electronics. Better for you older Teenagers, put one of the small 2S Emotor sets up front,and forget the Chiropractor and Cryopacker
...being English you might enjoy some Trivia concerning the name. Flinger, it is short for Fling Her. In a skit from the 70’s the Monty Python Lads are seen Launching a Cat off a Spinning Ceiling Fan. John Cleese is the normal BBC Suit and Eric Idle is his usual innocent unaware simpleton. John Cleese makes a comment like “Well that is very interesting. And just how do you get the cat in the Fan. Eric looks up with child like Round Eyes and quips, Uh I just Fling Her...
Please enjoy and Thank you for Preserving this design. Dad would be pleased. He signed this one by the way. His J’s were always far better than mine.
Larry Jolly - 30/04/2021
Add a comment



Download File(s):


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2022.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.