Shinden (oz12913)

 

Shinden (oz12913) by Bob Thacker from Model Builder 1984 - plan thumbnail

About this Plan

Shinden. Radio control scale model WWII Japanese fighter.

Quote: "The Shinden never made it as a production line fighter in WWII - the end of the war came before the bugs could be worked out of the design. Leave it to the colonel to do that 40 years later! Kyushu Shiden J7W-1, by Bob Thacker.

In WW-II, the Japanese were well aware that their continued success and high superiority with their Zero fighter would not continue, particularly when the P-38s and the US Navy's Hellcats and Wildcats started to achieve high kill rates in the middle of 1942 and 1943. They immediately started to design and develop the Shinden, which means 'magic lightning.' This aircraft was to be a state-of-the-art fighter to handle all of the allied and enemy interceptors, plus take on the B-29 long range, high altitude bomber they knew would be encountered over their homeland.

The initial development of the aircraft was started in 1942; a two-place, man carrying model was built to test the theories and concepts of the canard. It was to be a navy fighter. and research indicates there was a German engineer as co-designer of this extraordinary airplane. The engineer's name was Franz Pohl.

A few of the state-of-the-art features. at least for the Japanese fighters were: self-sealing fuel tanks, armor plating, four 30 mm cannon, and oxygen augmentation to the engine above 40,000 feet. The oxygen augmentation to the engine was something that US aircraft did not have until well into the American spy plane era. It was a very new and very unique feature.

The airplane had experienced only three initial test flights as of the last week of the war in August 1945. In each test flight, the duration was only ten minutes. Your author, having been in the test pilot business, assures you that a ten-minute test flight is a: My God, let's get this thing on the ground! The Shinden's problems were: excessive torque reaction because of the six-bladed propeller, the oil temperatures were running above the red line on each flight, and the pilot could not trim the aircraft to fly to the left (it could only fly to the right because of the excessive torque). Initially, the Shinden's canard incidence was one degree, and it took full back stick to keep the aircraft straight and level. These were just some of the problems. They never did get the gear up on any of the three test flights. Corrections were underway, but the end of hostilities stopped all work. We liberated the only Shinden built, and it is now in the Smithsonian Institute in Washington DC.

What I really achieved with this project was the satisfaction, the excitement, the thrills, and some of the tragedies of successfully completing the flight test program of the Shinden by radio control drone forty years after the end of the war. The excitement and some of the problems will be fully covered in the flight test program of the model itself.

I like to start my projects with the construction of the wing because it's the easiest component of the aircraft to build and it gets me going. Besides, we must have it to make the fuselage wing saddle. We decided to use foam core construction (have your foam wings cut commercially). You will see the center and tip rib patterns to be used on the plans. When you have them cut, make sure there are three degrees of washout in each wing panel to assist against tip stall.

The only recommendation I can make is if you are not familiar with foam core wings and balsa covering. RCM magazine has a pamphlet on techniques to be used. I used an epoxy to put the skins on, and I'm not too satisfied with the results. I think a good magic tape (sticky on both sides) would work out, or you can use the conventional contact cement method. Either one would do. Make sure that your torque rods are at least 1/4-inch diameter aluminum tubing. If you use a thin wire for a torque rod, you're going to have aileron flutter. I used B&D pneumatic retracts. (B&D Company makes a very fine box that the gear sits into, and I highly recommend its use.) Make sure that you put 1/8-inch plywood reinforcements on each end of the box so that you will have a good. solid bearing for the box between the foam core and the sheeting itself.

While we're at it, let's talk wheel well door covers. In order for those wheel well doors to fit perfectly, laminate them from two sheets of 1/32 ply. Form them right over your wheel well door area before you make the cutouts. Epoxy both sheets together and tape them to the wings. When they're cured, you will have a perfect door. For the nose gear covers, use six layers of six-ounce cloth.

As long as we're talking about wings, we might as well discuss the canard, which is also a wing. (That's where you get some of your increased performance: both flying surfaces of a canard design are lifting surfaces.) The canard wing is made out of balsa..."

Shinden, Model Builder, August 1984.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Shinden (oz12913) by Bob Thacker from Model Builder 1984 - model pic

Datafile:
  • (oz12913)
    Shinden
    by Bob Thacker
    from Model Builder
    August 1984 
    62in span
    Scale IC R/C LowWing Pusher Military Fighter
    all formers complete :)
    got article :)
  • Submitted: 18/02/2021
    Filesize: 1053KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

ScaleType:
  • Kyushu_J7W | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz12913) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Kyushu_J7W
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Shinden (oz12913) by Bob Thacker from Model Builder 1984 - pic 003.jpg
003.jpg
Shinden (oz12913) by Bob Thacker from Model Builder 1984 - pic 004.jpg
004.jpg
Shinden (oz12913) by Bob Thacker from Model Builder 1984 - pic 005.jpg
005.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

I tend to like Japanese WW2 warbirds, most have very pleasant curves. This one does as well, even if her 'pleasant curves' meant no surety of success. But anyway where else can you find a single-engine fighter with five wheels?
The designer Col Bob Thacker looks a bit daffy in his Japanese Freemason kimono but make no mistake! The plan itself is very sensible, a pity we don't have more from him here in OZ. If you intend to build the Magnificent Lightning - that's what the name means and is justification enough for the entire project! - do read the article carefully if you want to avoid the terrible experiences both original and model went under.
Miguel - 30/03/2021
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.