Aero L-59 (oz12889)

 

Aero L-59 (oz12889) by Cyril Carr from RCME 1997 - plan thumbnail

About this Plan

Aero L-59. Radio sontrol scale model jet trainer. Wingspan 40 in, wing area 270 sq in. For electric power using a pusher prop, or PSS glider.

Quote: "Aero L-59. Cyril Carr introduces his multi-purpose semi-scale jet for electric 540 or PSS.

I was initially drawn to the L59 when I saw a static model on the Aero stand at Farnborough, for not only did the model have attractive lines, it had a particularly eye catching colour scheme too. I have made several semi-scale jets for electric flight and thought that the L59 could be designed as a pusher model whilst also being ideal for PSS (Power Scale Soaring). I have found that pusher propellers are very effective, possibly giving up to 15% more thrust, but for some reason propeller noise is higher.

To ensure a satisfactory performance in model form, some dimensions have been modified a little, but I have been very careful not to disturb the overall lines of this very shapely aircraft. The body is marginally slimmer and the wing area has been increased, however if you wish to achieve an even closer scale appearance then the span can be reduced by removing the outer panel of each wing. Only do this if you are fully aware of the effects that the modification will have on performance and handling.

FUSELAGE: Construction begins by cutting the two fuselage sides from 1/8 medium balsa. Whilst working with the 1/8, cut out formers Fl to F8 and then move to 1/2 soft balsa and cut B1 to B5. Notice the slight angles to the sides of B3 and B4. Mark the position of all these parts on the inside surfaces of the fuselage sides. Scoop out parts of B2 and B3 where the Rx NiCad will fit. It is important that all batteries are fitted as far forward as possible to achieve the correct centre of gravity.

Glue B2 and B5 together at the correct angle and glue formers F1 to F5 in position on B2 and B5, Allow to set. Glue the lower half of the two fuselage sides to B2 and B5, allow to dry and then glue Bl, B3 and B4 in place. When ready apply glue to the top half of the formers, pull the sides in and pin in place to achieve the correct shape. Remove the part of B2 where the wings will fit and add the servo tray F17 (1/8 ply) and ply facings F9 to Fl 1 (1/32 ply). The dummy air intakes are made by gluing half formers F12 - F16 to the fuselage sides followed by a covering of 1/16 sheet. Chamfer the edges as required and glue these in place to take on the correct curvature. As you will find out, the biggest part of the 1/16 intake side covering, is glued to the 1/8 fuselage side, at the rear. Sand the fuselage to shape and cut battery access slots in F6 and F7.

Sand the fin and tailplane to shape, cut the appropriate slots in the fuselage and install as accurately as possible. Make the cockpit parts Cl to C3 and install the cockpit glazing and fittings. A moulded canopy is available from the Nexus Plans department.

To finish the fuselage construction, make the motor tube from a two layer roll of 1/64 ply. Install the tube and cut the cooling slots for the brushes. Use a good 540 or 600 size motor, preferably timed for reverse running and a 7 x 4 prop. If the recommended bungee launching system is to be adopted (see page 70), install the launching hook at the position shown.

WINGS: The wing profile shown on the plan is suitable for relaxed electric flying and PSS however, as mentioned earlier, the span can be reduced by one panel on each side if you wish. No washout is required and if you prefer, the wings may also be completely sheet covered.

Cut all the ribs from 1/8 balsa and lay the lower main spar and aileron hinge line spar over the plan. Glue the ribs in position followed by the top spar and leading edge. Sheet the LE with 1/16 balsa and sheet also between R1 and R2. When dry remove from the plan and sheet the lower surface. Repeat for the second wing and cut a slot in the lower surfaces and R1 where the wing brace W1 will go. Join the wings with 8 degrees dihedral and wrap the join with a reinforcement bandage of your choice. Install a plastic tube in one wing from root to tip for the Rx aerial and drill two holes for the wing fixing dowels as shown. Fit the wing fixing bracket at F11 and finally make and fit the ailerons noting that the movement is +/- 8 mm. The tip tanks can be detachable using dowels if you wish..."

Direct submission to Outerzone.

Quote: "Hello, Mary and hello, Steve, Hereby I send to you a plan I couldn't find in your archive. It's the plan and article. I redrew this in INKSCAPE adding some details and a bit more accuracy. That is the SVG file I send along. With that modellers can draw their own variations and/or pull a PDF file from it. Thank you for Outerzone and kind regards from Holland,"

Supplementary file notes

Article.

CAD file

This plan is available for download in CAD format.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Aero L-59 (oz12889) by Cyril Carr from RCME 1997 - model pic

Datafile:
  • (oz12889)
    Aero L-59
    by Cyril Carr
    from RCME
    October 1997 
    40in span
    Scale Electric Glider R/C LowWing Military
    all formers complete :)
    got article :)
  • Submitted: 06/03/2021
    Filesize: 72KB
    Format: • PDFvector • CADfile
    Credit*: HJvanTol

ScaleType:
  • Aero_L-59_Super_Albatros | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz12889) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Aero_L-59_Super_Albatros
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Aero L-59 (oz12889) by Cyril Carr from RCME 1997 - pic 003.jpg
003.jpg
Aero L-59 (oz12889) by Cyril Carr from RCME 1997 - pic 004.jpg
004.jpg
Aero L-59 (oz12889) by Cyril Carr from RCME 1997 - pic 005.jpg
005.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
  • Aero L-59 (oz12889)
  • Plan File Filesize: 72KB Filename: Aero_L-59_oz12889.pdf
  • Supplement Filesize: 3939KB Filename: Aero_L-59_oz12889_article.pdf
  • CAD Zip Filesize: 54KB Filename: Aero_L-59_oz12889_cad.zip
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.