About this Plan
Thermalnose. (Migrator and Thermalnose). A/2 glider model.
Quote: "WHEN ERNIE AVORY'S Migrator was introduced to Aeromodeller Plans Service in our November 1962 issue we were pleased to be able to quote its high contest performance in postal international events between the Vancouver (British Columbia) and Halifax (Yorkshire) model dubs. Migrator has enjoyed considerable popularity because it appeals to British modellers with its simple construction and many practical aspects, not to mention its performance potential.
At the 1963 World Championship for gliders, Ernie Avory failed by a mere nine seconds to gain an equal first place, this time with a development of Migrator, incorporating a shorter nose and longer tail moment. It is our pleasure to announce that Ernie has provided full details of the revised fuselage and small alteration to the wing construction which are now incorporated in the APS at no extra charge, as reproduced below.
Thermalnose fuselage was designed by the method of trial and error, though Ernie admits the errors were small. For a long time he thought he should employ a longer tail moment arm, and a slightly shorter nose moment, and presumed that this would require a much smaller tailplane. After experimenting with smaller area tailplanes he came to the conclusion that the Migrator wing and tailplane were near ideal. In using the longer tail moment arm one must be very careful in choosing the right weight of wood for the rear of the fuselage, the rudder and the tailplane. The secret of performance is in building as light a tail as possible. The model employed in Wiener Neustadt, had four tailplane spares and each of them weighed oz. The auto-rudder and dethermaliser lines are purposely kept on the outside of the fuselage. It is easier to replace a line in case of stretch or breakage.
If Thermalnose is built correct. ly according to the plan, and all flying surfaces are true when assembled, no difficulty should be encountered on the tow. Do not tow your model up too fast, one can walk Thermalnose to the top of the line. It is better to take it up slowly and so stand a chance of feeling a thermal pull on the way up. If this happens, the model will rise much faster, and the last trick is to lead the model round carefully into its natural circle, this helps enormously in not stalling the model off the line, with consequent loss of height.
By developing a series of models and flying them frequently to watch closely for various faults, then using past experience and knowledge to apply corrections, one is able to develop a stable design such as this one that is straight on the tow, and capable of winning contests. Thermainose has more than proved its capability in that direction!"
Thermalnose, Aeromodeller, January 1964.
Direct submission to Outerzone.
Supplementary file notes
Article pages, thanks to RFJ.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email email@example.com
User commentsRe Thermalnose.
It’s a glider, not rubber!
K K Iyer - 21/02/2021
Got it. Thanks.
SteveWMD - 21/02/2021
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2021.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.