Demdike (oz12819)

 

Demdike (oz12819) by J Riley, E Lord from RCME 1961 - plan thumbnail

About this Plan

Demdike. Radio control slope soarer model.

Quote: "R/C Slope Soaring. J Riley and E Lord provide some useful information on the art of R/C slope soaring.

...probably the most valuable information we can pass on is which type of model and construction we have found to be most suitable. The model should be heavy by normal standards, with a wing loading between 8 and 20 ounces per 100 sq in of wing area. Size should be from about 450 sq in upwards. Bigger models fly better, but against this must be considered the economy, ease of transport and durability of a small model.

Low drag is a necessary factor to combine penetration with a low sinking speed, but streamlining must definitely take second place to the requirements for maximum strength. Given a reasonable soaring site, efficiency is of little importance, a strong practical model being the main requirement.

Specifications we have found suitable, given as a rough guide, are as follows: Aspect ratio 8 to 10, tail 35 per cent wing area. With this tail a larger wing can be fitted on the same fuselage for flying in light winds. Fuselage length about Rths wingspan and dihedral around 1 in tip rise per foot span. A rudder 25 per cent of the fin area using very small (about 5°) angular movement gives satisfactory control. Construction must be decided with the necessary fast flying speed in view, and for the fuselage, must be in terms of 1/8 ply, 1/2 in hardwood formers and spruce longerons, fibreglass, etc. The wing must be correspondingly strong.

The model 'Demdike' features a detachable pan of 1/8 ply and hardwood formers, etc which carries all the batteries and is located by a Newey Snap Fasteners and shear pins and held on by rubber bands. On one flight (first flight Elfin 1.49 assisted) this fuselage parted company with the wings at 300 ft and model and receiver were undamaged despite having penetrated 6 in into hard ground. Tie rods with nuts and washers hold the fuselage sides together and glass fibre reinforcement is used. The fuselage is covered with a light grade of fibre-glass tissue with heavy weight model span over this. Parachute nylon also makes excellent covering material and the wing, constructed mainly of spruce, is covered with this. It is recommended that the wing should be mounted on top of the fuselage, as with any shoulder wing arrangement, the wings cannot knock off so easily."

Direct submission to Outerzone.

Quote: "Hi Steve & Mary, I hope you are well, and staying safe in these trying times... I recently found a handfull of RCM&E magazines that I had stored away and forgotten about. They are in the A5 format from the early 1960s, so I scanned this slope soarer at 1200 DPI and cleaned it up a bit, seems to have come up OK. An interesting view of the early days of R/C Sloping, they built them tough in those days, (still do I suppose, but not with wood). Unusual stabilizer airfoil."

Note this is not a full size plan. If anyone out there can submit a scan of the full size plan, that would, of course, be great.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

No model pic found for this plan

Datafile:
  • (oz12819)
    Demdike
    by J Riley, E Lord
    from RCME
    December 1961 
    87in span
    Glider R/C
    formers unchecked
    got article :)
  • Submitted: 11/02/2021
    Filesize: 133KB
    Format: • PDFbitmap
    Credit*: EricBeilby

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.