Sunday Flyer (oz12802)

 

Sunday Flyer (oz12802) by Ken Willard from Model Builder 1981 - plan thumbnail

About this Plan

Sunday Flyer. Simple free flight model. Uses the Ace foam wing.

Quote: "Sunday Flier by Ken Willard. Here's the ideal project to kindle a flame from that spark of interest shown by the youngster in your life. One evening or weekend isn't much time to devote to its construction, and who knows - you might learn something!

In the past ten years, literally hundreds of thousands of 1/2A engines have been made and used by hobbyists as power for their boats, airplanes and cars. Most of the boats, airplanes and cars have long since been wrecked, but the engines are still lying around, unused, but still usable. The hobbyist has lost interest. Most of them, to be sure, are youngsters who would like to do something with their engine, but they don't have a lot of money to buy radios and suitable kits. So what can be done with all those engines?

How about putting them into a simple sport free flight model? One that will need a minimum of building time, practically no adjustments, yet will give good flights and teach the owner quite a bit about flying simple powered models. With that in mind, the design of the Sunday Flyer was developed.

The secret of a good flying model is the trueness of the alignment of the structure. The most critical, in that regard, is the wing. Very few newcomers to airplane modeling can construct a wing which doesn't have any warps. With that in mind, the Sunday Flyer uses ready-built foam wings. That feature, combined with the solid balsa fuselge, insures an accurately built model, just what you want for your first try in building a flying model.

The foam wings used on the Sunday Flyer are produced and sold by Ace R/C, Inc., Box 511D, Higginsville, MO 64037. These particular wings have the tips of the panels precut at a precise angle of three degrees (3°) so that you don't have to sand them before putting them together. They are called Sunday Flier wings, and the catalog number is 13165. Yes, I know that the spelling is not the same as the name of the airplane. Don't let it bother you. Somehow, the modeling people have never agreed on whether you're a 'flyer' or a 'flier' so don't worry about it..."

Sunday Flyer, Model Builder, December 1981.

Direct submission to Outerzone.

Note this plan used the Ace Foam wing. For a plan showing how to construct a replacement wing in balsa (both tapered and straight-chord) see Ace Foam Wing (oz8557) thanks to AndyKunz.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Sunday Flyer (oz12802) by Ken Willard from Model Builder 1981 - model pic

Datafile:
  • (oz12802)
    Sunday Flyer
    by Ken Willard
    from Model Builder
    December 1981 
    70in span
    IC F/F
    all formers complete :)
    got article :)
  • Submitted: 18/02/2020
    Filesize: 295KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

Sunday Flyer (oz12802) by Ken Willard from Model Builder 1981 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

To say that the wingspan of the "Sunday Flyer" is 35" would be wrong - this model used two sets of Ace wings & had a total span of 70". It was a really slow flying plane with all of that wing, etc. Think I'll build another after all of these years!
Flyer Mike - 12/02/2021
Aha. Got it, 70 inches. Fixed now. Many thanks.
SteveWMD - 12/02/2021
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.