Ryan Mailplane (oz12798)

 

Ryan Mailplane (oz12798) by Victor Harden from American Aircraft Modeler 1969 - plan thumbnail

About this Plan

Ryan Mailplane. Rubber scale model.

Quote: "Ryan M-1 Mailplane, by Vic Harden. From this design the Spirit of St Louis was developed. Rubber-powered model has details galore for the expert and clear instructions for the beginner.

BEFORE 1926 few people had seen an airmail plane up close. But about that time the government began to award contracts to private firms to carry the mail. This was the real beginning of our present day airline companies.

Along with designs by Douglas, Boeing and others, was one built by the Ryan Airlines School of San Diego. The aircraft performed well even with lower horsepower and a heavier Hispano-Wright engine, in place of a Wright J4 engine originally specified. Known as the Ryan M-1, the plane later became the M-2. Some were built with the Hisso, some with the J4, for airline com-panies in the West.

Then Lindbergh picked Ryan to build his airplane. As history records he was successful in 1927 on a long and lonely trip, from New York to Paris. His Ryan number 29 was a descendant of the M-1 and M-2. The similarity was evident between the M-1 and the NYP Ryan used by Lindbergh.

Our rubber-powered model is the Hisso-powered version. It provides more nose length, giving a graceful and smooth appearance. A number of photographs exist of this version of the M-1 and M-2 as well as the J4 version. The American Airman Magazine, Vol 4, No 7, of July 1961, shows two M-1/ M-2 Hisso versions. General Aviation News Monday, March 24, 1969, carries a picture of the M-1 now on display in San Diego.

You can build a full-detail-scale type, or a scale-outline type. Both types require about the same effort and both will perform well. My model was a scale outline variety used to develop a larger diesel-engined job. The amount of detail will affect the final weight.

Start with the wing since it is the most difficult part. Using the patterns for the spars, front and rear, aileron and false spar and centerline splices, each cut from 1/32 straight-grain sheet, make two of each except the centerline splice pieces. The rib template is cut from light gauge aluminum or tin. Use the template to cut 30 upper rib caps from 1/32 straight-grain sheet. Each rib should be 3/32 wide. In addition, cut 1/32 x 1/8 strips for the lower caps from the same material. The leading edge is 3/32 sq. and the trailing edge is 1/16 x 1/4.

Trace the shape of the tip on a piece of cardboard about 1/16 thick. Cut out at the inside line and use it to bend the 1/32 x 3/32 laminations to shape. Soak the wood in hot water a few minutes, then bend it around the cardboard form, holding the strips in place with pins pushed into any soft material used as a flat base. Use an oven at 125° F to speed up the drying time to a half hour.

Two sets are required. The wing structure can be set up over wax-paper-covered plans. Trim the forward ends of the lower rib caps to a 45-degree angle and assemble them in place with the spars, trailing edge pieces and leading edge strip. The upper rib caps are trimmed to match at the leading edge with a 45-degree angle cut, and to fair at the trailing edge on the lower rib cap. Build the wing, including the ailerons, as a single unit. Cut away the ailerons after the tips are completed..."

Direct submission to Outerzone.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Ryan Mailplane (oz12798) by Victor Harden from American Aircraft Modeler 1969 - model pic

Datafile:
  • (oz12798)
    Ryan Mailplane
    by Victor Harden
    from American Aircraft Modeler
    November 1969 
    27in span
    Scale Rubber F/F Cabin Civil
    all formers complete :)
    got article :)
  • Submitted: 01/02/2021
    Filesize: 702KB
    Format: • PDFbitmap
    Credit*: theshadow

ScaleType:
  • Ryan_M-1 | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz12798) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Ryan_M-1
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Ryan Mailplane (oz12798) by Victor Harden from American Aircraft Modeler 1969 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
  • Ryan Mailplane (oz12798)
  • Plan File Filesize: 702KB Filename: Ryan_M-1_Mailplane_oz12798.pdf
  • Supplement Filesize: 1203KB Filename: Ryan_M-1_Mailplane_oz12798_article.pdf
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.