Bowden Baby Duration (oz12767)

 

Bowden Baby Duration (oz12767) by CE Bowden from Welbeck Model Aircraft 1946 - plan thumbnail

About this Plan

Bowden Baby Duration. Rubber duration model.

Direct submission to Outerzone.

"Bowden Baby Duration. Col Bowden, being primarily a power man, installed rather over-generous sheeting at the front of the fuselage (which would make it ideal for tiny diesel or electric power). When building mine I was more economical in this regard and therefore the wing ended up slightly further back than shown on the plan.

Building was dead easy and the weights turned out quite light:
Fus/UC: 25g
Wing: 16g
Tai:l 5g
Prop: 16g
Total: 62g

Out on the meadow in far too much wind for trimming, I tried some test glides by launching whilst walking backwards. It seemed OK so 350 turns went on and it turned right for half a circuit before the wing stalled followed by the prop stalling and an ungainly descent. As it was already turning right it seemed to need downthrust so a bit of 1/8 went in on the top of the noseblock. This might seem a lot but the hole at the front is cave-like in comparison to most similar planes. Next flight, it seemed well under control bucking around in the turbulence turning right on both power and glide but with a slight stall on the latter. Time to put it back in the box thankful that there was no damage and the trim didn’t look far off.

Next time out, it was absolutely beautiful and only needed the addition of a .5mm shim of extra right thrust to obtain some great flights. On the last one, it got as high as any flight I have ever had at Port Meadow and I expected a difficult retrieve but the 45-degree pop up wing DT brought it down ultra-efficiently within the boundary hedge.

Bowden’s Baby is a great job and an easy build."

Planfile includes build instructions.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Bowden Baby Duration (oz12767) by CE Bowden from Welbeck Model Aircraft 1946 - model pic

Datafile:
  • (oz12767)
    Bowden Baby Duration
    by CE Bowden
    from Welbeck Model Aircraft
    1946 
    30in span
    Rubber F/F Cabin Kit
    all formers complete :)
  • Submitted: 15/01/2021
    Filesize: 831KB
    Format: • PDFbitmap
    Credit*: AndrewLonghurst

Bowden Baby Duration (oz12767) by CE Bowden from Welbeck Model Aircraft 1946 - pic 003.jpg
003.jpg
Bowden Baby Duration (oz12767) by CE Bowden from Welbeck Model Aircraft 1946 - pic 004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2021.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.