Drop Me A Line (oz12739)

 

Drop Me A Line (oz12739) by Jerry Brofman from Air Trails 1948 - plan thumbnail

About this Plan

Drop Me A Line. Free flight towline glider model. Ritz wing construction.

Quote: "DEAR JOE: Knowing that you're the type of model builder who enjoys building and flying towline gliders, and knowing that you appreciate anything new in the way of technique, structure, and design in model aviation, I am sure you will be very much pleased with this set of towline glider plans.

This glider is the product of many years of practical experimentation. It combines lightness, extreme strength, and exceptional performance. It is a challenge to the builders of the large, high aspect ratio type of towline glider, and I am sure that with this ship you will have no trouble in competition against the very best in the model gliding and soaring field.

You will find the plans very complete. However, here is some information to help explain the interesting structure of this model.

The fuselage is constructed by first cutting the main horizontal keel of 1/16 medium bard sheet balsa. Then cut the upper and lower keels of the same material. Cement the upper and lower keels to the center on each side of the main horizontal keel: When this is dry add the cross braces which are of 1/8 square medium hard balsa, to the positions shown. I don't think you could ask for a fuselage more easy to build than this.

The tail surfaces are constructed by cutting them to outline shape from %a" medium hard sheet balsa. Sand them as usual. and cover with colored rubber model type tissue, using dope as an adhesive. Cement the rudder to the stabilizer.

You have probably noticed that the wing is quite unusual. Well, Joe, this wing is really nothing new, but isn't too well known to the average model builder. Among the experts, it is called a 'Ritz' wing. Its outstanding features are extremely high lift per square inch of area and high strength-to-weight ratio. Its structure is quite simple as you will see.

Begin by cutting the outline shape from 1/8 medium hard sheet balsa. Glue these sheet sections together as shown by the plans. Next cut the three templates (one for the center, one for each tip) of sheet balsa. Moisten the entire wing with lukewarm water and pin it to the templates as described on the plans. Allow this to dry for at least three hours - preferably overnight. This will 'pre-form' the wing to its required airfoil shape.

When dry, remove the pins from the wing and insert the ribs in their respective positions. These ribs are cut from 1/8 medium hard sheet balsa, using the template as a guide, as shown on the plans. Join the two wing halves just as you would those of a hand-launched glider. Three inches of dihedral is required at each tip. There is no need telling you that, this joint should be strong, so don't spare the 'stick-um'..."

Direct submission to Outerzone.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Drop Me A Line (oz12739) by Jerry Brofman from Air Trails 1948 - model pic

Datafile:
  • (oz12739)
    Drop Me A Line
    by Jerry Brofman
    from Air Trails
    January 1948 
    30in span
    Glider F/F
    all formers complete :)
    got article :)
  • Submitted: 18/12/2020
    Filesize: 1282KB
    Format: • PDFbitmap
    Credit*: theshadow

Drop Me A Line (oz12739) by Jerry Brofman from Air Trails 1948 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.