Whynott (oz12736)

 

Whynott (oz12736) by Pat Tritle from Model Aviation 2020 - plan thumbnail

About this Plan

Whynott. Rubber sport model. Wingspan 26 in, wing area 97.7 in.

Note this plan is a free download available from the Model Aviation site at http://modelaviation.com/whynott-pat-tritle where it appears along with the full build text and some great build pics. Also a free download of the plan in tiled format.

Quote: "I’ve dabbled in Free Flight (FF) for many years, but as time marched on, modeling endeavors gave way to Control Line and eventually RC. During those pursuits, FF fell by the wayside, although I never lost my desire to chase those little rubber-powered models, hopping from one thermal to the next across the prairie. After years of inactivity, the bug bit again and I decided to have another go at FF.

My goal was to design a simple Sport model that would be quick and easy to build, could deliver flight durations of a minute or so in calm air, and could be flown at smaller fields. With no preconceived notions of what the new design should look like, I simply sat down and laid out a three-view outline that 'looked about right.'

When the tweaking was done, the structure was filled in and it was time to build. The result was Whynott.

Construction is simple, incorporating only a small number of shaped parts to keep building quick and easy. Basic construction is from bits of 1/16-, 1/20- (optional), 3/32-, and 3/16-inch sheet and 3/32-inch square balsa with a few standard sizes sprinkled in where needed. Covering and trim was done with Japanese tissue and dope. The result is a worthy little Sport flyer with a ton of potential for those with larger flying venues.

Framing the Model: Begin by cutting out the parts from the appropriate wood sizes using the provided patterns. In an attempt to keep the flying weight to a minimum, ribs R2, R3, and R4 were cut from 1/20-inch balsa, although 1/16-inch balsa could be substituted with no ill effects.

Construction begins with the vertical and horizontal stabilizers. The frames are built directly over the plans using part DF and 3/32-inch square balsa. When completed, lift the frames from the board and sand to shape. Bend the tailskid from .025-inch steel wire, fit it into the rudder, and glue it in place.

The fuselage side frames are also built directly over the plans. Pin MPS in place and build the right-side frame around it. Fit the 1/16-inch balsa fill at the front, flush against the building board. The left-side frame is built the same way, but with the balsa fill flush with the top edge of the frame.

To join the frames, pin the 3/32 × 3/16-inch balsa header in place over the plans along with the two 3/32-inch square balsa crosspieces at the wing saddle. Pin the side frames upside down over the plans, align them vertically, and glue the crosspieces in place. Add the bottom crosspieces in the cabin area. Pull the tail post together, glue it, then add the remaining crosspieces aft of the cabin..."

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Whynott (oz12736) by Pat Tritle from Model Aviation 2020 - model pic

Datafile:

Whynott (oz12736) by Pat Tritle from Model Aviation 2020 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.